Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
  
[+] Expand All
[-] Collapse All

Related Documentation

Before You Configure and Run the Network Publisher

Before you configure and run the network publisher:

  • Verify the version of the Junos OS that is running on each devices running Junos OS.

    Typically, all the devices running Junos OS should run the same version of the Junos OS.

  • Verify that the C Series Controller can connect to the SAE-managed devices running Junos OS.
  • Make sure that an SSH (recommended) or a Telnet service is enabled on each router from which the network publisher is to collect interface information.

    When you run the network publisher, it connects to a number of devices running Junos OS through the configured protocol.

  • Identify the routing tables and elements in the routing tables from which you want the network publisher to collect information. Which tables and elements you select depends on the application to use the NIC OnePopStaticRouteIp or the OnePopVrfIp configuration scenario.
  • Before you run the network publisher, make sure that the NIC is enabled.

Related Documentation

Modified: 2017-08-03