Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
  
[+] Expand All
[-] Collapse All

Configuring Access to Policy Data (SRC CLI)

Use the following configuration statements to configure access to policy data:

shared sae configuration ldap policy-data {policy-dn policy-dn ;parameter-dn parameter-dn ; directory-eventing; polling-interval polling-interval ; }

To configure SAE access to subscriber data:

  1. From configuration mode, access the configuration statement that configures SAE access to policy data in the directory. In this sample procedure, the policy data is configured in the se-region group.
    user@host# edit shared sae group se-region configuration ldap policy-data
  2. Specify the subtree in the directory in which policy data stored.
    [edit shared sae group se-region configuration ldap policy-data] user@host# set policy-dn policy-dn
  3. Specify the subtree in the directory in which policy parameter data is cached.
    [edit shared sae group se-region configuration ldap policy-data] user@host# set parameter-dn parameter-dn
  4. (Optional) Enable or disable automatic discovery of changes to policy data.
    [edit shared sae group se-region configuration ldap policy-data] user@host# set directory-eventing
  5. Set the frequency for checking the directory for updates.
    [edit shared sae group se-region configuration ldap policy-data] user@host# set polling-interval polling-interval
  6. (Optional) Verify your configuration.
    [edit shared sae group se-region configuration ldap policy-data]
    user@host# show 
    policy-dn o=Policy,<base>;
    parameter-dn o-Parameters,<base>;
    directory-eventing;
    polling-interval 30;

Related Documentation

Modified: 2017-08-03