Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
  
[+] Expand All
[-] Collapse All

Related Documentation

Viewing Statistics About Filtered Traffic (SRC CLI)

Purpose

You can obtain information about the packets filtered on a C Series Controller by accessing statistics for the iptables Linux tool. You can also reset the counters for this tool.

Action

To view information about packet filtering on a C Series Controller:

user@host> show iptables <nat | filter | mangle> <reset-counters>

Where:

  • nat—Displays information for the nat table for the iptables tool. The nat table provides rules for rewriting packet addresses.
  • filter—Displays information for the filter table for the iptables tool. The filter table provides rules for defining packet filters.
  • mangle—Displays information for the mangle table for the iptables tool. The mangle table provides rules for adjusting packet options, such as quality of service.

    For example:

    user@host> show iptables
    Chain INPUT (policy ACCEPT 25M packets, 9401M bytes)
     pkts bytes target     prot opt in     out     source               destination 
    Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
     pkts bytes target     prot opt in     out     source               destination 
            
    Chain OUTPUT (policy ACCEPT 24M packets, 4506M bytes)
     pkts bytes target     prot opt in     out     source               destinationreset-counters

To reset the values in the output for the show iptables command:

user@host> show iptables reset counters

Related Documentation

Modified: 2017-08-02