Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Viewing Runtime Parameters (SRC CLI)
Purpose
Runtime parameters are parameters that are filled in with an actual value from the running system when the policy is installed. The SRC software comes with many predefined runtime parameters. Although the SRC CLI allows you to modify runtime parameters, you should not modify them. You can view a list of runtime parameters and view information about these parameters.
Action
To view a list of runtime parameters:
user@host# edit policies global-parameters runtime-parameters ? Possible completions: ah Maps protocol 51 to AH any_priority Sets packet loss priority to "any" any_protocol Sets the drop profile protocol to "any" best_effort Service flow scheduling type is best effort bootp Specifies the BOOTP protocol . . . user_ipAddress IP address of the subscriber user_ipMask IP mask of the subscriber virtual_ipAddress Virtual portal address used with redundant SAEs winframe Specifies the WinFrame protocol yellow Sets the color of an action or classifier to yellow
To view information about runtime parameters:
user@host> show configuration policies global-parameters runtime-parameters
parameter interpolated {
default-value "\"interpolate\"";
type dropProfileType;
}. . .
parameter low_priority {
default-value "\"low\"";
type packetLossPriority;
}
parameter ah {
default-value 51;
type protocol;
}
parameter sqlnet {
default-value "\"sqlnet\"";
type applicationProtocol;
}
parameter eq {
default-value "\"eq\"";
type portOperation;
}