Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Viewing NTP Peers (SRC CLI)
Purpose
View a list of NTP peers with the SRC CLI.
Action
user@host> show ntp associations remote local st poll reach delay offset disp ======================================================================= *myserver.jnpr.n 192.0.7.46 3 1024 377 0.00038 -0.000573 0.12178
Meaning
Table 1 describes the output fields for the show ntp associations command. Output fields are listed in the approximate order in which they appear.
Table 1: Output Fields for show ntp associations command
remote | Address or name of the remote NTP peer |
local | Address or name used by NTP on the local system |
st | Stratum of the remote peer |
poll | Polling interval, in seconds |
reach | Reachability register, in octal |
delay | Current estimated delay of the peer, in milliseconds |
offset | Current estimated offset of the peer, in milliseconds |
disp | Current estimated dispersion of the peer, in milliseconds |
