Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Verifying System Status

    You can use show commands to check system status and monitor system activity.

    To help you become familiar with show commands:

    1. Type show ? to display the list of show commands that you can use to monitor the SRC software and C Series Controller.
      user@host> show ?
      Possible completions:
        acp                  Display information about ACP
        cli                  Configure properties for the CLI environment
        component            Display information about SRC components
        configuration        Information about the SRC configuration
        date                 System time and date
        disk                 Configuration for RAID disks
        interfaces           Show interface information
        iptables             Display information about the iptables LINUX tool
        jps                  Display information about the JPS
        nic                  Display information about the NIC
        ntp                  NTP configuration information
        redirect-server      Statistics for redirect server
        route                Show routing table information
        sae                  Display SAE information
        security             Display security information
        system               Display system information
    2. Use the show component command to view the status of installed components.
      user@host> show component 
      Installed Components
      Name         Version                                            Status
      acp          Release: 7.8 Build: ACP.A.MAIN.1480                disabled
      activity     Release: 7.8 Build: ACTIVITY.A.MAIN.1480           running 
      agent        Release: 7.8 Build: SYSMAN.A.MAIN.1480             disabled
      appsvr       Release: 7.8 Build: JBOSS.A.MAIN.1480              disabled
      cli          Release: MAIN Build: CLI.A.MAIN.1480               running 
      database     Release: 7.8 Build: SSR.A.MAIN.1480                disabled
      diameter     Release: 7.8 Build: DIAMETER.A.MAIN.1480           running 
      dsa          Release: 7.8 Build: GATEWAYAPPS.A.MAIN.1480        disabled
      editor       Release: 7.8 Build: EDITOR.A.MAIN.1480             running 
      extsubmon    Release: 7.8 Build: MONAGENT.A.MAIN.1480           disabled
      gw-3gpp      Release: 7.8 Build: 3GPPGW.A.MAIN.1480             disabled
      gy-3gpp      Release: 7.8 Build: 3GPPGY.A.MAIN.1480             running 
      ims          Release: 7.8 Build: IMS.A.MAIN.1480                disabled
      jdb          Release: 7.8 Build: DIRXA.A.MAIN.1480              running 
      jps          Release: 7.8 Build: JPS.A.MAIN.1480                disabled
      licSvr       Release: 7.8 Build: LICSVR.A.MAIN.1480             disabled
      naming       Release: 7.8 Build: NAMING.A.MAIN.1480             running 
      nic          Release: 7.8 Build: GATEWAY.A.MAIN.1480            running 
      redir        Release: 7.8 Build: REDIR.A.MAIN.1480              disabled
      sae          Release: 7.8 Build: SAE.A.MAIN.1480                running 
      sic          Release: 7.8 Build: SICCLI.A.MAIN.1480             disabled
      vta          Release: 7.8 Build: VTA.A.MAIN.1480                disabled
      webadm       Release: 7.8 Build: WEBADM.A.MAIN.1480             disabled
      
    3. Use the show system information command to view general system information.

      Note: When you issue the show system information command in a virtualized SRC software, the manufacturer, version, and serial number details are not displayed in the output. In addition, the product name is displayed as vSRC.

      user@host> show system information
      System Identification
      Hostname         myCSeriesController
      Manufacturer     Juniper Networks
      Product Name     C-2000
      Version          1.0
      Serial Number    0207082006000001
      UUID             48384441-5254-0030-4859-0030485977EE
      Hostid           e30a2e07
      Software version SRC Release 2.0 
      System Time
      Current time              2006-12-19 13:52:26 EST
      Uptime                    21:30
      Number of active users    3
      Load Averages (1m/5m/15m) 0.02/0.07/0.02
      Memory
      Total 15G
      Free  14G
      CPU Info
      Number of CPU Core(s) 4
      CPU Model     Dual Core AMD Opteron(tm) Processor 265
      Clock Speed   1804.132 MHz
      Disk Information
        Mountpoint       Total Used  Use%
        /                2015M  955M  47%
        /altroot         2015M   35M   1%
        /altvar            29G   75M   0%
        /boot              98M   14M  14%
        /var               31G  829M   2%
      Temperature
      System         30.000 degrees C
      Physical CPU-1 34.000 degrees C
      Physical CPU-2 29.000 degrees C
      
      Fan Speed
      Fan-1 9375 RPM
      Fan-2 9375 RPM

    Modified: 2015-06-22