Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Enabling the Subscriber and Subscription Configuration (C-Web Interface)
Before you can configure subscribers and subscriptions with the C-Web interface, you must enable the policy, service, and subscriber editor on the C-Web interface. To do so:
- Click Manage>Enable.
The Enable pane appears.
- From the Component list, select Editor, and click OK.
If you are using multiple C Series Controllers, we recommend that you enable the policy, service, and subscriber editor on only one C Series Controller on your network.
 | Caution: If you enable the editor on multiple platforms, there is a risk that configuration changes will conflict. In this case, the second edit that is committed to the platform is lost. |
