Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring Logging Destinations to Send Messages to the System Logging Facility (SRC CLI)
Use the following configuration statements to configure system logging for the SRC 3GPP gateway:
slot number gw-3gpp logger name ...
slot number gw-3gpp logger name syslog { facility facilityfilter filter; format format; host host; port port; }
To configure logging destinations to send log messages to the system logging facility:
- From configuration mode, access the statement that configures
the name and type of logging destination. In this sample procedure,
the logging destination called log2 is configured. user@host# edit slot 0 gw-3gpp logger log2 syslog
- Specify the properties for the logging destination. [edit slot 0 gw-3gpp logger log2 syslog] user@host# set ?
For more information about configuring properties for the logging destination, see Configuring System Logging (SRC CLI).
- (Optional) Verify your configuration.
[edit slot 0 gw-3gpp logger log2 syslog] user@host# show
