Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Notification Targets (SRC CLI)

    Use the following configuration statements to configure notification targets:

    snmp notify target target-name { address address;port port;community community;type (trapv1|trapv2|inform); }

    To configure notification targets:

    1. From configuration mode, access the configuration statement that configures the notification target.
      [edit]user@host# edit snmp notify target target-name

      Specify the notification target name.

    2. Specify the IPv4 or IPv6 address of the system to receive notifications.
      [edit snmp notify target target-name] user@host# set address address
    3. (Optional) Specify the SNMP trap port number.
      [edit snmp notify target target-name] user@host# set port port
    4. Specify the community string used when sending traps.
      [edit snmp notify target target-name] user@host# set community community
    5. Specify the notification types as traps or informs. Traps are unconfirmed notifications. Informs are confirmed notifications.

      To specify the notification type as an SNMPv1 trap:

      [edit snmp notify target target-name] user@host# set type trapv1

      To specify the notification type as an SNMPv2 trap:

      [edit snmp notify target target-name] user@host# set type trapv2

      To specify the notification type as an SNMPv2 inform:

      [edit snmp notify target target-name] user@host# set type inform
    6. (Optional) Verify your configuration.
      [edit snmp notify target target-name] user@host# show

    Modified: 2014-06-10