Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Adding Network Devices (SRC CLI)

    To set up the MX Series router so that it can be managed by the SAE:

    1. From configuration mode, access the statements that configure network devices. This sample procedure uses mx1 as the name of the router.
      user@host# edit shared network device mx1
    2. Set the type of device to junos-ise.
      [edit shared network device mx1] user@host# set device-type junos-ise
    3. (Optional) Specify the origin hostname. This example procedure uses mx1-origin-host as the origin hostname. If the origin hostname is not configured, SAE uses the device name (mx1 in the example) as the origin hostname. If configured, the mentioned origin hostname must match the origin hostname of the Diameter peer (for example, MX Series router).
      [edit shared network device mx1] user@host# set origin-host mx1-origin-host

      Note: If the origin hostname is configured under the [edit shared network device name] hierarchy, the device name does not need to be same as the origin hostname of the Diameter peer. Otherwise, the device name must match the origin hostname of the Diameter peer.

    4. Specify the configured peers associated with the device. See Configuring Diameter Peers (SRC CLI).
      [edit shared network device mx1] user@host# set peers [peers...]

      Note: MX Series routers support only a single peer connection.

    5. From configuration mode, access the statements for virtual routers. The name must match the JSRC partition configured on the MX Series router, which is configured within the logical system:routing instance context. This sample procedure uses the name * for the virtual router.
      [edit shared network device mx1] user@host# edit virtual-router *

      where * matches any JSRC partition. You can also specify that the JSRC partition be configured in a logical system or in a logical system and routing instance. By default, logical system default and routing instance master are used.

    6. Specify the SAEs that can manage this router.
      [edit shared network device mx1 virtual-router default]user@host# set sae-connection [sae-connection...]
    7. (Optional) Specify the VPN identifier used by this virtual router. You can specify VRF instead of a string to use the VRF instance reported by the device as the VPN identifier. In this case, the VPN identifier is the name of the routing instance.
      [edit shared network device mx1 virtual-router default]user@host# set vpn-id (vpn-id | VRF)
    8. (Optional) Verify your configuration.
      [edit shared network device mx1] 
      user@host# show 
      device-type junos-ise;
      origin-host mx1-origin-host;
      peers bng-srcmx480b;
      virtual-router * {
        sae-connection 10.212.10.2;
        vpn-id 123;
      }

    Modified: 2016-04-18