Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring BoD Services

    You can create services with the Policies, Services, and Subscribers CLI or the Policies, Services, and Subscribers subtasks in the C-Web interface.

    Note: If you configure BoD services that use forwarding classes, take into consideration the number of forwarding classes supported on the router.

    To configure a service for BoD:

    1. Create a service.
    2. Specify the following values for the service:
      • Category—bod (service’s LDAP attribute sspCategory).
      • Description—Description of how this service will affect traffic.

        If you plan to integrate a basic BoD service with a BoD service, the description for each BoD service should take into consideration how the BoD service interacts with any basic BoD service selected. The description should also provide information about the forwarding treatment for traffic.

        This description will appear in the online help for BoD services in Enterprise Manager Portal. Although there is no upper limit for the length of this attribute, the portal will display the text in one paragraph.

      • Substitutions—Substitutions for the parameter names; these names start with “bod” (service’s LDAP attribute parameterSubstitution).

        Note that the actual parameter names are required to be the service parameter names for Enterprise Manager Portal.

      • Policy Group—Policy group that supports BoD services.

    For a sample BoD service, see serviceName=Gold, l=entJunos, o=Scopes, o=umc in the sample data.

    Modified: 2014-06-12