Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the RADIUS Local IP Address and NAS ID (SRC CLI)

    Use the following configuration statements to set the local RADIUS address and network access server (NAS ID):

    slot number sae radius {local-address local-address ;
    local-nas-id local-nas-id ;

    To set the local RADIUS address and NAS ID:

    1. From configuration mode, access the SAE RADIUS configuration. This configuration is under the slot 0 hierarchy.
      [edit]user@host# edit slot 0 sae radius
    2. Configure the local IP address that the SAE uses to communicate with RADIUS servers.
      [edit slot 0 sae radius] user@host# set local-address local-address
    3. Configure the NAS ID that identifies the SAE when it sends RADIUS authentication and accounting records. Typically, the NAS ID is the name of the SAE host.
      [edit slot 0 sae radius] user@host# set local-nas-id local-nas-id
    4. (Optional) Verify your configuration.
      [edit slot 0 sae radius] 
      user@host# show 
      local-nas-id SAE.host1;

    Modified: 2014-06-10