Related Documentation
- C Series
- Adding the Routers Acting as a PCEF and Running Junos OS (SRC CLI)
- Configuring Policies for Router Running Junos OS and Acting as PCEF (SRC CLI)
- Configuring Service-Level 3GPP Attributes for Gx Router Driver (SRC CLI)
- Configuring Subscriber-Level 3GPP Attributes for Gx Router Driver (SRC CLI)
- Viewing the State of Gx Router Drivers (SRC CLI)
- Managing MX Series Routers Acting as a PCEF Using the SRC Software Overview
Configuring the SAE to Manage Routers Acting as a PCEF and Running Junos OS (SRC CLI)
To set up the SAE to manage the routers (Services Control Gateways) running Junos OS and acting as a PCEF, configure a Gx router driver that establishes and maintains a connection with the peer.
Use the following configuration statements to configure the SAE to manage the routers (Services Control Gateways) acting as a PCEF:
![]() | Note: You can configure the charging information under the [edit shared sae group group-name configuration driver junos-gx] or [edit shared network device] hierarchy. The settings configured under the [edit shared network device] hierarchy override the settings under the [edit shared sae group group-name configuration driver junos-gx] hierarchy. |
To configure the SAE to manage the routers (Services Control Gateways) acting as a PCEF:
- From configuration mode, access the configuration statement
that configures the Gx router driver. In this sample procedure, the
Gx driver is configured in the POP-ID group.[edit]user@host# edit shared sae group POP-ID configuration driver junos-gx
- Specify the name of the community manager that manages
Gx driver communities. Active SAEs are selected from this community.[edit shared sae group POP-ID configuration driver junos-gx]user@host# set sae-community-manager sae-community-manager
- (Optional) Specify the keepalive timeout till which the
SAE waits for a response from the Diameter server before deleting
the registered Diameter server entry.[edit shared sae group POP-ID configuration driver junos-gx]user@host# set keep-alive-timeout keep-alive-timeout
- (Optional) Specify the interval between retrying a failed
registered Diameter server entry.[edit shared sae group POP-ID configuration driver junos-gx]user@host# set registry-retry-interval registry-retry-interval
- (Optional) Specify the time till which the SAE waits for
a response from the Diameter server.[edit shared sae group POP-ID configuration driver junos-gx]user@host# set reply-timeout reply-timeout
- (Optional) Configure the session store parameters for
the Gx router driver.
From configuration mode, access the configuration statement that configures the session store for the Gx router driver.
[edit]user@host# edit shared sae group POP-ID configuration driver junos-gx session-storeFor more information about configuring session store parameters, see Configuring the Session Store Feature (SRC CLI).
- (Optional) Specify whether the SAE should be synchronized
from the session store.[edit shared sae group POP-ID configuration driver junos-gx]user@host# set sync-from-sessionstore
- (Optional) Specify the timeout till which the SAE waits
for the thread to work before declaring the thread as idle and stopping
the thread.[edit shared sae group POP-ID configuration driver junos-gx]user@host# set thread-idle-timeout thread-idle-timeout
- (Optional) Specify the number of working threads that
process requests.[edit shared sae group POP-ID configuration driver junos-gx]user@host# set thread-pool-size thread-pool-size
- (Optional) From configuration mode, access the configuration
statements that configure charging information for the Services Control
Gateway at group level.[edit]user@host# edit shared sae group POP-ID configuration driver junos-gx charging-server-info
- (Optional) Specify the address of the primary online charging
system.[edit shared sae group POP-ID configuration driver junos-gx charging-server-info]user@host# set primary-event-charging-function primary-event-charging-function
- (Optional) Specify the address of the secondary online
charging system.[edit shared sae group POP-ID configuration driver junos-gx charging-server-info]user@host# set sec-event-charging-function sec-event-charging-function
- (Optional) Specify the address of the primary offline
charging system.[edit shared sae group POP-ID configuration driver junos-gx charging-server-info]user@host# set primary-charging-collection-function primary-charging-collection-function
- (Optional) Specify the address of the secondary offline
charging system.[edit shared sae group POP-ID configuration driver junos-gx charging-server-info]user@host# set sec-charging-collection-function sec-charging-collection-function
- (Optional) Verify your configuration.
[edit shared sae group POP-ID configuration driver junos-gx] user@host# show charging-server-info { primary-charging-collection-function primary-charging-collection-function; primary-event-charging-function primary-event-charging-function; sec-charging-collection-function sec-charging-collection-function; sec-event-charging-function sec-event-charging-function; } keep-alive-timeout keep-alive-timeout; registry-retry-interval registry-retry-interval; reply-timeout reply-timeout; sequential-message-timeout sequential-message-timeout; thread-idle-timeout thread-idle-timeout; thread-pool-size thread-pool-size;
Related Documentation
- C Series
- Adding the Routers Acting as a PCEF and Running Junos OS (SRC CLI)
- Configuring Policies for Router Running Junos OS and Acting as PCEF (SRC CLI)
- Configuring Service-Level 3GPP Attributes for Gx Router Driver (SRC CLI)
- Configuring Subscriber-Level 3GPP Attributes for Gx Router Driver (SRC CLI)
- Viewing the State of Gx Router Drivers (SRC CLI)
- Managing MX Series Routers Acting as a PCEF Using the SRC Software Overview