Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Protocol Conditions with Parameters (C-Web Interface)

    Before you assign a parameter for the protocol, you must create a parameter of type protocol and commit the parameter configuration.

    To configure a protocol condition that contains a parameter value for the protocol:

    1. In the side pane, select a policy rule.
    2. From the Create new list, expand a traffic condition, and select Parameter Protocol Condition.
    3. Click Create, enter information as described in the Help text in the main pane, and click Apply.
    4. (Optional) To configure protocol attributes:
      1. In the side pane, expand Parameter Protocol Condition, and select Proto Attr.
      2. Click Create, enter information as described in the Help text in the main pane, and click Apply.

    To configure source and destination ports:

    1. In the side pane, expand Proto Attr>Source Port, and select Port.
    2. Click Create, enter information as described in the Help text in the main pane, and click Apply.
    3. In the side pane, expand Proto Attr>Destination Port, and select Port.
    4. Click Create, enter information as described in the Help text in the main pane, and click Apply.

    Modified: 2014-06-11