Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring ICMP Conditions (SRC CLI)

    Use the following configuration statements to add ICMP conditions to a classify-traffic condition:

    policies group name list name rule name traffic-condition name icmp-condition {protocol protocol ; protocol-operation protocol-operation ; ip-flags ip-flags ; ip-flags-mask ip-flags-mask ; fragment-offset fragment-offset ; packet-length packet-length ;icmp-type icmp-type ; icmp-code icmp-code ; }

    Because the protocol is already set to ICMP, do not change the protocol or protocol-operation options.

    To add ICMP conditions to a classify-traffic condition:

    1. From configuration mode, enter the ICMP configuration. For example:
      user@host# edit policies group bod list input rule pr traffic-condition ctc icmp-condition
    2. (Optional) Configure the value of the IP flags field in the IP header.
      [edit policies group bod list input rule pr traffic-condition ctc icmp-condition]user@host# set ip-flags ip-flags
    3. (Optional) Configure the mask that is associated with the IP flag.
      [edit policies group bod list input rule pr traffic-condition ctc icmp-condition]user@host# set ip-flags-mask ip-flags-mask
    4. (Optional) Configure the value of the fragment offset field.
      [edit policies group bod list input rule pr traffic-condition ctc icmp-condition]user@host# set fragment-offset fragment-offset
    5. (Optional) Configure the packet length on which to match. The length refers only to the IP packet, including the packet header, and does not include any layer 2 encapsulation overhead.
      [edit policies group bod list input rule pr traffic-condition ctc icmp-condition]user@host# set packet-length packet-length
    6. (Optional) Configure the ICMP packet type on which to match. The packet type must be supported by the router or CMTS device.
      [edit policies group bod list input rule pr traffic-condition ctc icmp-condition]user@host# set icmp-type icmp-type
    7. (Optional) Configure the ICMP code on which to match. The ICMP code must be supported by the router or CMTS device.
      [edit policies group bod list input rule pr traffic-condition ctc icmp-condition]user@host# set icmp-code icmp-code
    8. (Optional) Verify the ICMP condition configuration.
      [edit policies group bod list input rule pr traffic-condition ctc icmp-condition]
      user@host# show 
      protocol icmp;
      protocol-operation 1;
      ip-flags ipFlags;
      ip-flags-mask ipFlagsMask;
      fragment-offset ipFragOffset;
      icmp-type icmpType;
      icmp-code icmpCode;

    Modified: 2012-05-02