Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- C Series
- Configuring an SAE Group (C-Web Interface)
- Creating RADIUS Peers (C-Web Interface)
- For information about defining RADIUS packet templates, see Flexible RADIUS Plug-Ins Overview
- Types of Authentication Plug-Ins
Limiting Subscribers on Router Interfaces (C-Web Interface)
You can limit the number of authenticated subscribers who connect to an IP interface on the router. This plug-in does not limit the number of unauthenticated subscribers who connect to an IP interface, and does not limit the number of subscribers who connect to a physical or link-layer interface. In the case of subscriber interfaces, the plug-in limits the number of authenticated subscribers on the subscriber interface but not on the underlying primary IP interface.
To set up a plug-in that limits the number of subscribers on interfaces:
- Click Configure, expand Shared>SAE, and then expand the SAE group for which you want to configure subscriber limits.
- In the side pane, expand Configuration>Plug Ins.
- Expand the plug-in that you created for limiting subscribers,
and then click Interface Subscriber Limit.
The Interface Subscriber Limit pane appears.
- Click Create, enter information as described in the Help text in the main pane, and then click Apply.
Related Documentation
- C Series
- Configuring an SAE Group (C-Web Interface)
- Creating RADIUS Peers (C-Web Interface)
- For information about defining RADIUS packet templates, see Flexible RADIUS Plug-Ins Overview
- Types of Authentication Plug-Ins
