Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Specifying a Basic NTP Configuration on a C Series Controller (C-Web Interface)
We recommend that you configure NTP on C Series Controllers.
To configure NTP to operate on a C Series Controller:
- Click Configure, expand System, and then click NTP.
The NTP pane appears.
- Click Create, enter information
as described in the Help text in the main pane, and then click Apply.
Note: If you do not configure a boot server, NTP cannot synchronize with a time server if the server’s time is very far off the local system’s time.
