Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Before You Start the SRC CLI

    Make sure the SRC software has been configured for remote access through SSH and/or Telnet.

    Note: On a C Series Controller, root access is not allowed over a Telnet session. To enable root access over an SSH connection, you must configure the system services ssh root-login allow statement.

    For information about initial CLI configuration, see the SRC PE Getting Started Guide.

    Modified: 2014-06-10