TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Event Traps

Table 1 lists the event traps.

Table 1: Event Traps

Trap Event	Trap ID	Text Displayed
saeLicenseNetworkCapacity	9	$S:SAE:The total number of sum-weighted line cards allocated in this SRC network is $LINE_CARD_NUMBER ($THRESHOLD_PERCENTAGE)%. This $L the network ERX capacity threshold of $T sum-weighted line cards.: $A
saeServiceSessionLicense	11	$S:LICENSE SERVER:$SERVICE_SESSIONS ($SERVICES_PERCENTAGE%) of the available licensed service sessions are in use.: $A
vtaEjbConnectionStatus	13	INFORMATION:SAE:Vta EJB plug-in connection changes its status:RAISE
sspluginSyncFailQueueSize	15	When the trap is raised, the text displayed is: SS Plugin:{plugin-name}: Mem Fail queue Size during Synchronization exceeded:RAISE When the trap is cleared, the text displayed is: SS Plugin:{plugin-name}: Mem Fail queue Size during Synchronization exceeded:CLEAR Note: If the SAE is restarted after the trap is raised, then the SRC software does not send the clear trap for the already raised trap.
routerConnClosed	211	When juniSaeRouterUseFailOver is FALSE: INFORMATION:SAE Router Driver: The router connection to $juniSaeRouterClientId has been closed.:RAISE When juniSaeRouterUseFailOver is TRUE: INFORMATION:SAE Router Driver:The router connection to $juniSaeRouterClientId has been closed and redirected to $juniSaeRouterFailOverIp:$juniSaeRouterFailOverPort:RAISE
routerConnDown	212	INFORMATION:SAE Router Driver:The router connection to $juniSaeRouterClientId went down.:RAISE
routerConnRejected	213	INFORMATION:SAE Router Driver:The router connection from $juniSaeRouterClientId has been rejected.:RAISE
routerConnUp	210	INFORMATION:SAE Router Driver:A new router connection was established with $juniSaeRouterClientId.:RAISE
routerConfOutOfSynch	214	When the trap is raised, the text displayed is: INFORMATION:SAE Router Driver: The configured state of router $juniSaeRouterClientId is out of synch with SAE. The configured action to be taken by SAE is $configuredAction.:RAISE When the trap is cleared, the text displayed is: INFORMATION:SAE Router Driver: The configured state of router $juniSaeRouterClientId is successfully resynchronized with SAE.:CLEAR
agentStarted	110	INFORMATION:Agent: The agent has started.:RAISE
agentRestartFailed	111	CRITICAL: Agent: The agent has failed to restart after $ATTEMPTS attempts:RAISE
agentShutdown	112	INFORMATION:Agent:The agent has shutdown.:RAISE
componentUp	114	INFORMATION:$I: This component is up.:RAISE
componentDown	115	INFORMATION:$I: This component is down:RAISE
dirConnected	130	INFORMATION:$I:The directory connection has been established with $LDAP_HOST on port $LDAP_PORT, and has a type of $CONNECTION_TYPE.:RAISE
dirConnectionFailure	131	CRITICAL:$I:The directory connection with $LDAP_HOST has failed.:RAISE
dirNotAvail	132	CRITICAL:$I:A directory connection is not available.:RAISE
nicHostRedundStateSwitched	240	INFORMATION:NIC Host: The redundancy state of the NIC Host has switched to $juniNicHostRedundState.:RAISE
nicHostMisconfigured	241	INFORMATION:NIC Host: The NIC Host failed to start due to misconfiguration. The error message is "$MESSAGE".:RAISE
nicHostBlacklistedSAE	242	CRITICAL:NIC sae-client agent:Blacklisted SAE: <SAE-KEY>:RAISE
acpSyncCompleted	290	INFORMATION: ACP State Sync:ACP finished state sync with SAE for $juniAcpVirtualRouterName.:RAISE
acpRedundStateSwitched	291	INFORMATION: ACP Host:The redundancy state of the ACP Host has switched to $juniAcpRedundState.:RAISE
acpCPUsage	281	When the trap is raised, the text displayed is: 'CRITICAL:ACP:{acpCPUsed%}% of congestion point is in use. This exceeded the threshold of {THRESHOLD}%.:RAISE' where acpCPUsed% is the percentage of bandwidth in use out of the total bandwidth of the congestion point. 'MAJOR:ACP:{acpCPUsed%}% of congestion point is in use. This is below the threshold of {THRESHOLD}%.:RAISE' where acpCPUsed% is the percentage of bandwidth in use out of the total bandwidth of the congestion point. 'MINOR:ACP:{acpCPUsed%}% of congestion point is in use. This exceeded the threshold of {THRESHOLD}%.:RAISE' where acpCPUsed% is the percentage of bandwidth in use out of the total bandwidth of the congestion point. When the trap is cleared, the text displayed is: 'CLEAR:ACP:{acpCPUsed%}% of congestion point is in use. This is below the threshold of {THRESHOLD}%.:CLEAR' where acpCPUsed% is the percentage of bandwidth in use out of the total bandwidth of the congestion point.
jpsAmConnUp	260	INFORMATION: JPS:A new application manager connection was established.:RAISE
jpsAmConnDown	261	INFORMATION:JPS:The application manager connection went down.:RAISE
jpsCmtsConnUp	262	INFORMATION:JPS:A new CMTS connection was established.:RAISE
jpsCmtsConnDown	263	INFORMATION:JPS:A CMTS connection went down.:RAISE
jdbReplicationFailure	292	When the trap is raised, the text displayed is: INFORMATION:jdbReplicationFailure:Failed to replicate LDAP data {juniSdxJdbReplicationDirection} neighbor {juniSdxJdbNeighbor}.The latest JDB replicaiton status is:{juniSdxJdbLastStatus }:RAISE When the trap is cleared, the text displayed is: INFORMATION: jdbReplicationFailure:Community directory server {juniSdxJdbNeighbor} latest update status error:CLEAR
systemOperatingFailure	300	When the trap is raised, the text displayed is: INFORMATION:System:hardware failure is found with $juniSdxOperatingSensor on system $juniSdxOperatingLocation:RAISE When the trap is cleared, the text displayed is: INFORMATION:System:hardware failure with $juniSdxOperatingSensor on system $juniSdxOperatingLocation is cleared:CLEAR
diskFailure	301	When the trap is raised, the text displayed is: INFORMATION:System:disk failure is found:RAISE When the trap is cleared, text displayed is: INFORMATION:System:disk failure is cleared:CLEAR

TechLibrary

Related Documentation

Event Traps

Related Documentation

Modified: 2014-12-04