Trap Definitions
Table 198 lists proprietary SNMP traps generated by Steel-Belted Radius Carrier. The columns in Table 198 consist of the following:
OID Suffix—Identifies the OID suffix for the trap. To identify the OID number for an alarm, append the OID suffix to the Juniper Networks (Funk) OID prefix (1.3.6.1.4.1.1411). For example, the ASN.1 number for the funkSbrTrapServiceStarted trap is 1.3.6.1.4.1.1411.1.1.0.100.
Trap—Identifies the name of the proprietary trap.
Description—Describes when the trap is generated.
Type—Indicates whether the trap is informational, warning, or error.
Note Some Steel-Belted Radius Carrier traps may be diluted so that one message is generated when some number of events occur. For example, when five events occur, one message can be sent instead of five discrete messages, so frequently occurring traps do not overwhelm the network with unnecessary messages.
Note Traps for Service Level Manager (SLM) client events are Early Field Trial features and are not yet fully qualified. If you use any of these, it is your responsibility to ensure that the feature operates correctly in your targeted configuration. These traps are marked with an asterisk (*) in the OID Suffix column.
Table 198: fnkradtr.mib Trap Definitions
OID Suffix
Trap Name
Description
Type
100
funkSbrTrapServiceStarted
Sent when the RADIUS server is started.
Cause: Trap indicates that the server itself has started. This does not mean that all of the various configured features have loaded successfully.
If there is an issue with another component, traps specific to it indicate so. This trap shows that a valid license is installed. You can now interact with the server through the Web GUI or LDAP Configuration Interface.
Severity: If unexpected, this can be the result of the radius process crashing, which produces a core dump file.
Info
101
funkSbrTrapServiceStopped
Sent when the RADIUS server is stopped.
Cause: The server completed its shutdown operation and is no longer running. Server does not respond to any operation from the Web GUI, LCI, or from any inbound RADIUS data.
Severity: If unexpected, this can be the result of a core in the RADIUS process.
Info
102
funkSbrTrapThreadsNormal
Sent when the number of available threads in the accounting or authentication server has risen above a specified threshold.
You can set this threshold value in the [Thresholds] section of the events.ini file.
Cause: The number of available threads on the system has risen above the threshold configured in the events.ini file.
Info
103
funkSbrTrapFSNormal
Sent when the number of bytes available in the file system from which the server is running has risen above a specified threshold.
You can set this threshold value in the [Thresholds] section of the events.ini file.
Cause: The number of bytes available in the free disk space has increased above the threshold configured in the events.ini file.
Severity: This can cause the system to become inoperable.
Info
104 *
funkSbrTrapConcurrencyReconnect
Sent when RADIUS reconnects to the Service Level Manager server after it has sent a ConcurrencyFailure, ConcurrencyTimeout, or ConcurrencyLocalProxyFailure trap.
Cause: If a failure to communicate with the Concurrency Server has occurred, this trap is sent when communications have been re-established and the SLM server is responding again.
Severity: Users may have either been rejected or been able to exceed their configured concurrent login policy during the time interval when communications with the CS were down. This depends on the settings in the forward.aut configuration file which resides on any of the SBR servers acting as clients to the CS. Check the RejectIfUnreachable setting if you are uncertain as to the expected behavior of Steel-Belted Radius Carrier in the event that the CS is unreachable.
Info
105
funkSbrTrapSQLReconnect
Sent when RADIUS reconnects to the SQL database after it has sent a SQLConnectFail trap.
Cause: If a failure to communicate with the SQL server database has occurred, this trap is sent when communications have been re-established and the SQL server is responding again.
Severity: Users may have either been rejected or been allowed onto the network without proper verification of credentials during the time interval when the SQL server was unreachable. This depends on the settings in the radsql.aut configuration file. Check the [Failure] section settings if you are uncertain as to the expected behavior of Steel-Belted Radius Carrier in the event that the SQL server is unreachable.
Info
106
funkSbrTrapLDAPReconnect
Sent when RADIUS reconnects to the LDAP server after it has sent a LDAPConnectFail trap.
Cause: If a failure to communicate with the LDAP database has occurred, this trap is sent when communications have been re-established and the LDAP server is responding again.
Severity: Users may have either been rejected or been allowed onto the network without proper verification of credentials during the time interval when the LDAP server was unreachable. This depends on the settings in the ldapauth.aut configuration file. Check the [Failure] section settings if you are uncertain as to the expected behavior of SBR in the event that the LDAP database is unreachable.
Info
107
funkSbrTrapUserAccountLocked
Sent when a user's account becomes locked out due to an excessive number of rejected authentication attempts within a defined period of time.
Cause: A user's account is locked, disallowing access to the network, after an excessive number of rejected authentication attempts. This functionality is configured in the lockout.ini file.
Severity: The user is not able to access the network until the account is unlocked.
Info
108
funkSbrTrapUserAccountReleased
Sent when a user's account, previously locked due to an excessive number of rejected authentication attempts, becomes unlocked.
Info
109
funkSbrTrapProxySpoolReconnect
Sent when the proxy accounting spooler reconnects to the target realm after it has sent a ProxySpoolTimeout trap.
Cause: Issues affecting transmission of spooled accounting proxy data to one or more configured downstream targets have been resolved (possibly a restoration of the network link, or the downstream proxy accounting server has become available again).
Severity: If unexpected, then the accounting target system (possibly a billing server) was not receiving data from the AAA server for some time interval. During that time, data was written to the local disk for temporary storage until the accounting target became available again.
Info
110
funkSbrTrapIPAddrPoolNormal
Sent when the number of available IP addresses in any pool rises above a specified threshold. IP pool thresholds can be configured in events.ini file.
Severity: Users may have been rejected if threshold warning trap 5027 was ignored.
Info
111
funkSbrTrapSQLConnect
Sent only once, when RADIUS initially connects to the SQL database.
Info
112
funkSbrTrapLDAPConnect
Sent only once, when RADIUS initially connects to the LDAP server.
Info
113
funkSbrTrapWatchdogStarted
Sent when the radiusd watchdog is started.
Info
114
funkSbrTrapWatchdogStopped
Sent when the radiusd watchdog is stopped.
Info
115
funkSbrTrapWatchdogRadiusStarted
Sent whenever the radiusd watchdog attempts to start or restart the RADIUS server.
Info
116
funkSbrTrapUserAccountRedirected
Sent when a user account has been redirected due to an excessive number of rejected authentication attempts.
Info
117
funkSbrTrapSS7CommunicationOK
Sent when SS7 communications are successful after a funkSbrTrapSS7CommunicationError trap has been sent.
Info
118
funkSbrTrapSS7CDRGenerationOK
Sent when CDR generation is successfully written.
Info
119
funkSbrTrapSS7AuthDatabaseOK
Sent when access to the Authorization databases are successful after a funkSbrTrapSS7AuthDatabaseError trap has been sent.
Info
120
funkSbrTrapSS7ProvDatabaseOK
Sent when access to the SMS Provisioning database is successful after a funkSbrTrapSS7ProvDatabaseError trap has been sent.
Info
121
funkSbrTrapProxyFastFailOK
Sent when a proxy target has come out of fast-fail mode and responded after a funkSbrTrapProxyFastFail trap was sent.
Info
122
funkSbrTrapProxyOutOfServiceOK
Sent when at least one target in a proxy realm has responded, come out of fast-fail mode, and returned into service after a funkSbrRTrapProxyOutOfService trap was sent.
Info
123
funkSbrTrapSSRCommunicationOK
Sent when SBRC is reconnected to SSR/CST.
Info
124
funkSbrTrapResumeLogging
Sent when the logging mechanism resumes logging after the amount of free space in the logging partition exceeds the threshold limit.
Info
128
funkSbrTrapCstSwitchOver
Sent when the session store switches from SSR cluster to local CST, or vice versa.
Info
5000
funkSbrTrapCmdArgBadPrivDir
Sent when an invalid private directory is specified on the command line used to launch the RADIUS server. The command line option is ignored.
Warning
5001
funkSbrTrapLowThreads
Sent when the count of threads available for the accounting or authentication server drops below a configurable threshold. An informational trap is sent when the count of available threads (at some future point) rises to an acceptable level.
Warning
5002 *
funkSbrTrapConcurrencyFailure
Sent when communications with the RADIUS concurrency server fails.
Trap can be diluted.
Warning
5003 *
funkSbrTrapConcurrencyTimeout
Sent when communications with the RADIUS concurrency server times out.
Trap can be diluted.
Warning
5004 *
funkSbrTrapConcurrencyLocalProxy
FailureSent when a local error prevents the RADIUS server from sending a proxy request to the RADIUS concurrency server.
Trap can be diluted.
Warning
5005
funkSbrTrapStaticAcctProxyTimeout
Sent when the RADIUS server times out in an attempt to forward an accounting request to the location specified by the static proxy option.
Trap can be diluted.
Warning
5006
funkSbrTrapStaticAcctProxyLocal
FailureSent when the RADIUS server encounters a local failure in an attempt to forward an accounting request to the location specified by the static proxy option.
Trap can be diluted.
Warning
5007
funkSbrTrapLowFSSpace
Sent when the amount of space available in the file system in which the server's private directory resides falls below a configurable threshold. An informational trap is sent when the amount of available space (at some future point) rises to an acceptable level.
Warning
5008
funkSbrTrapSQLConnectFail
Sent when the connection to a SQL database has failed.
Trap can be diluted.
Warning
5009
funkSbrTrapSQLDisconnect
Sent when a disconnect to a SQL database occurs.
Trap can be diluted.
Warning
5010
funkSbrTrapSQLTimeout
Sent when a timeout occurs during an attempt to perform transactions to a SQL database.
Trap can be diluted.
Warning
5015
funkSbrTrapLDAPConnectFailure
Sent when a connect failure to an LDAP server occurs.
Warning
5016
funkSbrTrapLDAPConnectFailures
Sent when an attempt to communicate with the LDAP Server has failed.
Trap can be diluted.
Warning
5017
funkSbrTrapLDAPDisconnects
Sent when the LDAP Server has disconnected.
Trap can be diluted.
Warning
5018
funkSbrTrapLDAPRequestTimeouts
Sent when a request sent to the LDAP Server has timed out.
Trap can be diluted.
Warning
5019
funkSbrTrapLDAPDisconnect
Sent when a disconnect to a LDAP server occurs.
Warning
5020
funkSbrTrapLDAPRequestTimeout
Sent when a request sent to the LDAP Server has timed out.
Warning
5021
funkSbrTrapProxySpoolTimeout
Sent when a request forwarded by the proxy accounting spooler has timed out. This trap is paired with 109 so that the name of the realm that has failed is reported.
Warning
5022
funkSbrTrapProxySpoolTimeouts
Sent when a request forwarded by the proxy accounting spooler has timed out. Reports the number of occurrences of failure.
Trap can be diluted.
Warning
5023 *
funkSbrTrapSoftLimitViolation
Sent when accepting a concurrency request exceeds a realm's soft limit.
Trap can be diluted.
Warning
5024 *
funkSbrTrapHardLimitViolation
Sent when a concurrency request is rejected because a realm's hard limit has been reached.
Trap can be diluted.
Warning
5025 *
funkSbrTrapConcurrencyServer
MisconfigurationSent when a PAS realm has been misconfigured. All authentication requests to the named realm are rejected.
Warning
5026
funkSbrTrapACCTWriteFailure
Sent when the server is unable to commit accounting data to a persistent store such as the file system, database, and so on.
Trap can be diluted.
Warning
5027
funkSbrTrapIPAddrPoolLow
Sent when the number of available IP addresses in any pool falls below a configurable threshold. An informational trap is sent when the number of available IP addresses (at some future point) rises to an acceptable level.
Warning
5028
funkSbrTrapWatchdogRadiusTerm
Sent whenever the radiusd watchdog attempts to send a TERM signal to terminate the RADIUS server.
Warning
5029
funkSbrTrapWatchdogRadiusKill
Sent whenever the radiusd watchdog attempts to send a KILL signal to terminate the RADIUS server.
Warning
5030
funkSbrTrapFloodQueueOverflow
Sent whenever a flood queue drops a packet.
Trap can be diluted.
Warning
5033 *
funkSbrTrapMappingFailure
Sent when rejecting a concurrency request that fails to resolve a realm or region name
Trap can be diluted.
Warning
5035
funkSbrTrapProxyFastFail
Sent when a proxy target does not respond and enters fast-fail mode.
Warning
5036
funkSbrTrapRealmOutOfService
Sent when all the targets for a proxy realm go out of service.
Warning
5037
funkSbrTrapProxySpoolRecordSkipped
Sent when all targets within a proxy realm do not respond and enter into fast-fail mode.
Trap is issued only when moving to next record after exceeding the configured retry value.
Warning
5038
funkSbrTrapProxyTransactionLimitSet
Sent when the transaction rate limit is applied by transaction-based licensing.
Warning
5039
funkSbrTrapProxyTransactionLimitCleared
Sent when the transaction rate limit is cleared by transaction-based licensing.
Warning
5040
funkSbrTrapSuspendLogging
Sent when the logging mechanism is temporarily suspended when the amount of free space in the logging partition is below the threshold limit.
Warning
10003
funkSbrTrapFailedThreadCreate
Sent when an attempt to create a thread at server startup encounters a failure. The server fails to start.
Error
10004
funkSbrTrapFailedMutexCreate
Sent when an attempt to create a mutual exclusion lock (mutex) at server startup encounters a failure. A mutex prevents multiple threads from executing critical sections of code simultaneously.
The server fails to start.
Error
10005
funkSbrTrapFailedSignalInit
Sent when an attempt to initialize signal handling at server startup encounters a failure. The server fails to start.
Error
10007
funkSbrTrapFailedLogFile
Sent when an attempt to open or create a log file at server startup encounters a failure. The server fails to start.
Error
10008
funkSbrTrapFailedLDAPAdminInit
Sent when an attempt to initialize the LDAP administration interface at server startup encounters a failure. The server fails to start.
Error
10010
funkSbrTrapFailedIPInit
Sent when an attempt to initialize basic TCP/IP services at server startup encounters a failure. The server fails to start.
Error
10011
funkSbrTrapFailedCurrentSessionsInit
Sent when an attempt to initialize current sessions table processing at server startup encounters a failure. The server fails to start.
Error
10012
funkSbrTrapFailedChallCacheInit
Sent when an attempt to initialize the RADIUS challenge continuation cache at server startup encounters a failure. The server fails to start.
Error
10013
funkSbrTrapFailedActiveRASInit
Sent when an attempt to initialize the network access server activity monitor at server startup encounters a failure. The server fails to start.
Error
10014
funkSbrTrapFailedDictionaryInit
Sent when an attempt to initialize the dictionary processing at server startup encounters a failure. The server fails to start.
Error
10015
funkSbrTrapFailedVendorInit
Sent when an attempt to process the vendor.ini file at server startup encounters a failure. The server fails to start.
Error
10016
funkSbrTrapFailedDBInit
Sent when an attempt to initialize the internal database at server startup encounters a failure. The server fails to start.
Error
10017
funkSbrTrapFailedUnixUserInit
Sent when an attempt to initialize the UNIX user browsing component at server startup encounters a failure. The server fails to start.
Error
10018
funkSbrTrapFailedAdminRightsInit
Sent when an attempt to initialize the administration user rights component at server startup encounters a failure. The server fails to start.
Error
10019
funkSbrTrapFailedDbOpen
Sent when an attempt to open the internal database at server startup encounters a failure. The server fails to start.
Error
10020
funkSbrTrapFailedDNISLookupInit
Sent when an attempt to initialize the tunnel DNIS lookup component at server startup encounters a failure. The server fails to start.
Error
10021
funkSbrTrapFailedConfigCacheInit
Sent when an attempt to initialize the configuration caching component at server startup encounters a failure. The server fails to start.
Error
10022
funkSbrTrapFailedDbCacheInit
Sent when an attempt to initialize the database caching component at server startup encounters a failure. The server fails to start.
Error
10023
funkSbrTrapFailedLicenseInit
Sent when an attempt to initialize the licensing component at server startup encounters a failure. The server fails to start.
Error
10025
funkSbrTrapFailedHostLookupInit
Sent when an attempt to initialize host lookup processing on NetWare at server startup encounters a failure. The server fails to start.
Error
10026
funkSbrTrapFailedAddrPoolInit
Sent when an attempt to initialize IP address pool resource management at server startup encounters a failure. The server fails to start.
Error
10027
funkSbrTrapFailedLoginLimitInit
Sent when an attempt to initialize user login count tracking at server startup encounters a failure. The server fails to start.
Error
10028
funkSbrTrapFailedPersistStoreCreate
Sent when an attempt to create the persistent store for current session list processing at server startup encounters a failure. The server fails to start.
Error
10029
funkSbrTrapFailedPersistStoreInit
Sent when an attempt to initialize the persistent store for current session list processing at server startup encounters a failure. The server fails to start.
Error
10031
funkSbrTrapFailedLockInit
Sent when an attempt to initialize admin locking component at server startup encounters a failure. The server fails to start.
Error
10032
funkSbrTrapFailedPluginInit
Sent when an attempt to initialize the plug-in support component at server startup encounters a failure. The server fails to start.
Error
10033
funkSbrTrapFailedPacketCacheInit
Sent when an attempt to initialize duplicate packet request cache at server startup encounters a failure. The server fails to start.
Error
10034
funkSbrTrapFailedNameMangleInit
Sent when an attempt to initialize name mangling support at server startup encounters a failure. The server fails to start.
Error
10035
funkSbrTrapFailedNameStripInit
Sent when an attempt to initialize name stripping support at server startup encounters a failure. The server fails to start.
Error
10036
funkSbrTrapFailedFSSpaceChecking
Sent when an attempt to determine the amount of free file system space fails. File system space checking is disabled until the server is restarted.
Error
10037
funkSbrTrapFailedNameValidateInit
Sent when an attempt to initialize name validation support at server startup encounters a failure. The server fails to start.
Error
10038
funkSbrTrapFailedResourceCheckInit
Sent when an attempt to initialize system resource checking at server startup encounters a failure. The server fails to start.
Error
10039
funkSbrTrapFailedSystemStatsInit
Sent when an attempt to initialize statistic collection at server startup encounters a failure. The server fails to start.
Error
10040
funkSbrTrapSQLConnectFailure
Sent when a connection attempt from the SQL authentication or accounting plug-in to the specified system has failed.
Error
10041
funkSbrTrapSQLDiscon
Sent when a disconnect from a SQL database has occurred.
Error
10042
(reserved for internal use) individual SQL timeout (not sent as a trap)
Error
10043
funkSbrTrapFailedReserveMemoryAlloc
Sent when an attempt to allocate reserved memory based on a setting in the radius.ini file fails. The server starts without reserved memory, but is unable to warn of low memory conditions.
Error
10044
funkSbrTrapReserveMemoryFreed
Sent when an attempt to allocate memory during runtime fails and the block of memory reserved at system startup is freed in an attempt to alleviate the low memory condition.
Error
10045
funkSbrTrapMemoryAllocFail
Sent when an attempt to allocate memory has failed.
Trap can be diluted.
Error
10048
funkSbrTrapFailedMibInfoCollectInit
Sent when an attempt to initialize MIB information collection at server startup encounters a failure. The server fails to start.
Error
10049
funkSbrTrapFailedMibInfoAccessInit
Sent when an attempt to initialize MIB access at server startup encounters a failure. The server fails to start.
Error
10050
funkSbrTrapFailedCommonIPInit
Sent when an attempt to initialize common IP services at server startup encounters a failure. The server fails to start.
Error
10051
funkSbrTrapWatchdogAborted
Sent whenever the radiusd watchdog terminates. This is typically due to a prolonged inability to control or communicate with the RADIUS server, or some fatal error that has occurred within the watchdog itself.
Error
10052
funkSbrTrapWatchdogFailedInit
Sent whenever the radiusd watchdog is unable to initialize itself. This is typically due to insufficient or invalid command line parameters given to the watchdog itself.
Error
10053
funkSbrTrapAdminAuthFailedInit
Sent whenever the server is unable to initialize administrative authentication and authorization. The server fails to start.
Error
10054
funkSbrTrapServiceFailedInit
Sent when the server has failed to start. This trap is sent in addition to a specific failure trap.
Error
10055
funkSbrTrapSS7MapGatewayFailedInit
Sent when the MAP Gateway has failed to initialize. The server starts but SS7 functions are not available.
Error
10056
funkSbrTrapSS7CommunicationError
Sent when Signalware communication has failed.
Error
10057
funkSbrTrapSS7CDRGenerationError
Sent once when Steel-Belted Radius Carrier fails to create CDR files.
Error
10058
funkSbrTrapSS7AuthDatabaseError
Sent once when Steel-Belted Radius Carrier fails to retrieve authorization information from any database.
Error
10059
funkSbrTrapSS7ProvDatabaseError
Sent when access to the Provisioning database has failed.
Error
10060
funkSbrTrapSSRCommunicationError
Sent when the connection to the SSR/CST has been lost.
Error
10061
funkSbrTrapMaxConcurrent
SessionsExceededTrap is sent when the number of concurrent active sessions in Steel-Belted Radius Carrier exceeds the count set by the license.
Error
Table 199 lists additional proprietary SNMP traps generated by Steel-Belted Radius Carrier for the jnx-aaa.mib.
The columns in Table 199 consist of the following:
OID Suffix—Identifies the OID suffix for the trap. To identify the OID number for an alarm, append the OID suffix to the Juniper Networks AAA mib OID prefix (1.3.6.1.4.1.2636.8.1). For example, the ASN.1 number for the jnxAAATrapUnauthorizedAdminRequest trap is 1.3.6.1.4.1.2636.8.1.0.5000.
Trap—Identifies the name of the proprietary trap.
Description—Describes when the trap is generated.
Type—Indicates whether the trap is informational, warning, or error.
Table 199: jnx-aaa.mib Trap Definitions
OID Suffix
Trap Name
Description
Type
100
jnxAAATrapServerStartup
This trap is sent when the Diameter server is started. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
Info
101
jnxAAATrapServerShutdown
This trap is sent when the Diameter server is stopped. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
Info
5000
jnxAAATrapUnauthorizedAdminRequest
This trap is sent whenever a request from the administrator interface is denied. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
jnxAAATrapVarAdminUserName
jnxAAATrapVarAdminRequestUri
jnxAAATrapVarAdminRequestErrorReason
This trap can be diluted.
Warning
10000
jnxAAATrapInternalError
This trap is sent when the Diameter Result-Code attribute value indicating internal error is set. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
jnxAAATrapVarResultCode
This trap can be diluted.
Error
10001
jnxAAATrapLicenseCheckFailure
This trap is sent when a disposition indicating license check failure is set. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
jnxAAATrapVarDisposition
jnxAAATrapVarLicenseCheckFailureReason
This trap can be diluted.
Error
10002
jnxAAATrapResourceFailure
This trap is sent when a disposition indicating resource failure is set. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
jnxAAATrapVarDisposition
This trap can be diluted.
Error
10003
jnxAAATrapLogFileFailure
This trap is sent when an attempt to open, create, or write a log file encounters a failure. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
This trap can be diluted.
Error
Table 200 lists additional proprietary SNMP traps related to the Diameter protocol. These traps are available in the jnx-aaa.mib and jnx-diameter-base-protocol.mib. Table 200 consists of the following columns:
OID Suffix—Identifies the OID suffix for the trap. To identify the OID number for an alarm, append the OID suffix to the Juniper Networks Diameter mib OID prefix (1.3.6.1.4.1.2636.8.1.2.1.0.0). For example, the ASN.1 number for the jnxDbpProtocolError trap is 1.3.6.1.4.1.2636.8.1.2.1.0.0.1.
Trap Name—Identifies the name of the proprietary trap.
Description—Describes when the trap is generated.
Type—Indicates whether the trap is informational, warning, or error.
Table 200: Diameter Trap Definitions
OID Suffix
Trap Name
Description
Type
1
jnxDbpProtocolError
Sent when the Diameter Result-Code attribute value is within the range of 3000 through 3999. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
jnxAAATrapVarResultCode
jnxDbpPeerId
This trap can be diluted.
Error
2
jnxDbpTransientFailure
Sent when the Diameter Result-Code attribute value is within the range of 4000 through 4999. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
jnxAAATrapVarResultCode
jnxDbpPeerId
This trap can be diluted.
Error
3
jnxDbpPermanentFailure
Sent when the Diameter Result-Code attribute value is within the range of 5000 through 5999. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
jnxAAATrapVarResultCode
jnxDbpPeerId
This trap can be diluted.
Error
4
jnxDbpPeerConnectionDown
Sent when the connection state of the Diameter peer is down. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
jnxDbpPeerId
This trap can be diluted.
Error
5
jnxDbpPeerConnectionUp
Sent when a responder transport connection or initiator transport connection is established for communication between the Diameter peer and SBR Carrier. Parameters:
jnxAAATrapVarSeverity
jnxAAATrapVarNumberOfOccurrences
jnxDbpPeerId
This trap can be diluted.
Error