SIGTRAN Support for Steel-Belted Radius Carrier
This part describes installing and configuring Signalware 9 with Service Pack 6.A on a Steel-Belted Radius Carrier server or a Session State Register node host.
These chapters only apply if the server or host supports:
The SIM optional authentication module
The WiMAX optional mobility module using EAP-AKA authentication (which requires the optional SIM authentication module)
If this server or host does not support any of these items, skip this part and continue with the appropriate sequence of tasks:
If this is a standalone SBR Carrier server, go to Installing and Configuring a SBR Carrier Standalone Server
If these are Session State Register hosts, go to Installing Session State Register Nodes
To configure Signalware 9 on Steel-Belted Radius Carrier server:
On a Linux platform, the operating system must comply with the following architecture:
64-bit kernel with x86-based architecture
Because the Signalware communication stack is not supported on Solaris, the SIM authentication module cannot be used on the Solaris platform to communicate with an HLR to process RADIUS requests. However, the module can be used with an HSS by using the RADIUS to Diameter conversion feature.
These chapters are included in this part: