Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Supporting SIM, SIGTRAN, and Other Protocols with Signalware

 

Steel-Belted Radius Carrier nodes that support SIM depend on Signalware 9 with Service Pack 6.5 software being properly installed on the Solaris server.

Also, if the EAP-AKA authentication protocol is used by the WiMAX mobility module, Signalware 9 with Service Pack 6.5 is required.

Note

We strongly recommend that Signalware software be installed and configured before Steel-Belted Radius Carrier is installed because the SBR Carrier installation incorporates Signalware settings, if they are available.

Juniper Networks provides an example Signalware installation with:

  • The correct settings for simple integration with Steel-Belted Radius Carrier.

  • The recommended procedures to configure Signalware 9 to support Steel-Belted Radius Carrier.

  • The recommended procedure for migrating configuration settings forward from an existing Signalware installation.

For details, see SIGTRAN Support for Steel-Belted Radius Carrier.