Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Configuring the Server


After you have installed the Steel-Belted Radius Carrier software on the server, have added the appropriate licenses, and can work with Web GUI, you can begin configuring the software. The specific steps you must perform depend on your network’s authentication and accounting needs.

The basic steps for configuring the Steel-Belted Radius Carrier environment include:

  1. Configure each of your RADIUS client devices to communicate with your Steel-Belted Radius Carrier server. To do this, you must log in to each device and run its configuration interface.

  2. Use the RADIUS Clients List page in Web GUI to configure the server to communicate with each RADIUS client. Details are in the Administering RADIUS Clients and Client Groups section of the SBR Carrier Administration and Configuration Guide.

  3. If the clients use RADIUS Location Groups or IP Address Pools, each of those entities must exist before the clients are configured. See the sections on Administering RADIUS Location Groups and Administering Address Pools in the SBR Carrier Administration and Configuration Guide for instructions on setting these up.

  4. Use the Users panel to identify the users or groups of users who are permitted to access the RADIUS clients.

    Specify user attributes by selecting them in the Users panel or by creating user profiles in the Profiles dialog.

For more information, see the SBR Carrier Administration and Configuration Guide.