Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring the Platform

 

To configure the platform:

  1. From the Initial Install screen, enter 2 to select Configure Platform.

    The Configure Platform screen is displayed.

  2. Enter 0 to accept the install directory that you entered earlier.

  3. Press Enter to accept the default Yes to answer the Continue with configure Platform procedure(yes or no) [yes]? prompt.

  4. Enter 1 when the CE Configuration screen is displayed. (No other entry is supported.)

    The UDP/TCP Port Configuration screen is displayed. It prompts you for a UDP port value.

  5. We recommend that you press Enter to accept the default UDP port base value, but you may enter an alternate.

    The UDP/TCP Port Configuration screen prompts you for a TCP port value.

  6. We recommend that you press Enter to accept the default TCP port base value, but you may enter an alternate.

    A confirmation screen prompts you to apply the configuration.

    Press Enter to accept the default Yes.

    A configure Platform completed successfully message is displayed.

  7. Press Enter.

    The Initial Install screen is displayed.