Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Supporting SIM with Signalware

 

Steel-Belted Radius Carrier support for SIM and other RADIUS protocols that use EAP-SIM or EAP-AKA (such as WiMAX, which may use EAP-AKA), depend on Signalware 9 with Service Pack 6V software being properly installed on the Solaris server.

Note

We strongly recommend that Signalware software be installed and configured before Steel-Belted Radius Carrier is installed because the SBR Carrier installation incorporates Signalware settings, if they are available.

Juniper Networks provides an example Signalware installation with:

  • The correct settings for simple integration with Steel-Belted Radius Carrier.

  • The recommended procedures to configure Signalware 9 to support Steel-Belted Radius Carrier.

  • The recommended procedure for migrating configuration settings forward from an existing Signalware installation.

See SIGTRAN Support for Steel-Belted Radius Carrier.