Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
  
[+] Expand All
[-] Collapse All

LDAP Configuration Interface File

Use the radius.ini file to establish settings for the LCI (Table 59). For more information about radius.ini, see the SBR Carrier Reference Guide.

Table 59: LDAP Configuration Interface File

File Name

Function

radius.ini

Specifies whether the LCI is enabled, the port used for LCI communication, and the interfaces on which Steel-Belted Radius Carrier listens for LCI requests.

Note: While running the Steel-Belted Radius Carrier configuration script, the following information is gathered and the corresponding parameters in the radius.ini file are populated:

  • The LCI status (enabled or disabled).
  • The LDAP TCP port number that is used for communication between Steel-Belted Radius Carrier and the LDAP client.
  • The interface addresses on which LCI should be enabled.
  • LCI password.

For more information about running the Steel-Belted Radius Carrier configuration script, see the Running the Steel-Belted Radius Carrier Configure Script section in the SBR Carrier Installation Guide.

Modified: 2017-09-27