Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Tools and Parts Required for Junos Pulse Gateway Grounding and Power Connections

    To ground and provide power to the Junos Pulse Gateway, you need the following tools and parts:

    • Phillips (+) screwdrivers, numbers 1 and 2
    • 2.5-mm flat-blade (–) screwdriver
    • 7/16-in. hexagonal-head external drive socket wrench, or nut driver, with a torque range between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm) tightening torque, for tightening nuts to terminal studs on each power supply on a DC-powered Junos Pulse Gateway.
    • Wire cutters
    • Electrostatic discharge (ESD) grounding wrist strap

    Published: 2011-07-25