Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    AC Power Cord Specifications for CSE2000 Devices

    Detachable AC power cords are supplied with AC-powered devices. The coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.

    Caution: The AC power cord for the devices is intended for use with that device only and not for any other use.

    Power Cable Warning (Japanese)

    Warning: The attached power cable is only for this product. Do not use the cable for another product.

    Note: In North America, AC power cords must not exceed 4.5 meters (approximately 14.75 feet) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical Code (CEC) Section 4-010(3). The cords supplied with the device are in compliance.

    Table 1 lists AC power cord specifications provided for each country or region.

    Table 1: AC Power Cord Specifications for CSE2000


    Electrical Specifications

    Plug Standards


    250 VAC, 10 A, 50 Hz

    AS/NZ 3112


    250 VAC, 10 A, 50 Hz

    GB2099 and GB1002

    Europe (except Italy, Switzerland, and United Kingdom)

    250 VAC, 10 A, 50 Hz

    CEE (7) VII


    250 VAC, 10 A, 50 Hz

    CEI 23-16


    125 VAC, 12 A, 50 or 60 Hz

    JIS C8303

    North America

    125 VAC, 13 A, 60 Hz

    NEMA 5-15


    250 VAC, 10 A, 50 Hz

    SEV 1011 SEV 6534/2

    United Kingdom

    250 VAC, 10 A, 50 Hz

    BS 1363/A

    Published: 2014-04-04