Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    VSE1100 and VSE2100 Chassis Overview

    The Virtual Services Engine is available in two models: VSE1100 and VSE2100. Table 1 provides an overview of chassis features for the VSE1100 model.

    Table 1: VSE1100 and VSE2100 Hardware Specifications

    Category

    Specification

    Rack mountable

    1 U; Front-mount or mid-mount; optional front-and-rear four-post mount

    Traffic interfaces

    (VSE1100) Four 1-Gigabit Ethernet RJ-45 ports

    (VSE2100) Two 10-Gigabit Ethernet RJ-45 ports

    Console interface

    (VSE1100 and VSE2100) One RJ-45 serial console port

    USB interface

    (VSE1100 and VSE2100) One USB port for software installation or reinstallation

    Processor

    (VSE1100) Single-quad core Intel

    (VSE2100) Dual-quad core Intel

    RAM

    (VSE1100) 24 GB DDR3

    (VSE2100) 48 GB DDR3

    Storage

    (VSE1100 and VSE2100) Six storage drive slots. Shipped with two SAS 900 GB 2.5-inch HDD in rear. Four additional 2.5-inch SATA or SAS drives slots (as specified by Juniper Networks) can be installed in front, in any combination.

    Fans

    (VSE1100 and VSE2100) Three 40-mm fans

    When the device is cool, the fans spin at a slower speed to reduce noise and save energy. As the device heats up, the fans run at a faster speed. In the event of fan failure, the fault LED blinks and the remaining fan or fans run at full speed.

    Power supplies

    Removable AC power supply standard: 90 VAC to 264 VAC, 50-60 Hz, 4.0 A Max, 650 W. Standard IEC power cord is provided for AC power supply.

    Removable DC power supply is an available option: –48 VDC, 20 A Max, 650 W. DC power cables supplied by the customer.

    AC and DC power supplies are supported simultaneously.

    Published: 2014-04-04