[an error occurred while processing this directive] [an error occurred while processing this directive]

Installing and Removing EX-series Switch Hardware Components

The EX-series switch chassis is a rigid sheet-metal structure that houses the other hardware components. The field-replaceable units (FRUs) in EX-series switches are:

  • Power supply
  • Fan tray
  • Uplink module
  • SFP transceiver
  • XFP transceiver

The power supply, fan tray, SFP transceiver, and XFP transceiver in EX-series switches are hot-removable and hot-insertable FRUs: you can remove and replace them while the switch is functioning without turning off power to the switch or disrupting switch functions. The uplink module is not hot-removable and hot-insertable: you must turn off power to the switch before removing or installing it.

To install a power supply in an EX-series switch, follow instructions in Installing a Power Supply in an EX-series Switch. To remove a power supply from an EX-series switch, follow instructions in Removing a Power Supply from an EX-series Switch.

To install a fan tray in an EX-series switch, follow instructions in Installing a Fan Tray in an EX-series Switch. To remove a fan tray from an EX-series switch, follow instructions in Removing a Fan Tray from an EX-series Switch.

To install an uplink module in an EX-series switch, follow instructions in Installing an Uplink Module in an EX-series Switch. To remove an uplink module from an EX-series switch, follow instructions in Removing an Uplink Module from an EX-series Switch.

To install an SFP or XFP transceiver in an EX-series switch, follow instructions in Installing an SFP or XFP Transceiver in an EX-series Switch. To remove an SFP or XFP transceiver from an EX-series switch, follow instructions in Removing an SFP or XFP Transceiver from an EX-series Switch.

[an error occurred while processing this directive]