[an error occurred while processing this directive] [an error occurred while processing this directive]

Field-Replaceable Units in EX-series Switches

Field-replaceable units (FRUs) are components that you can replace at your site. The field-replaceable units (FRUs) in EX-series switches are:

  • Power supply
  • Fan tray
  • Uplink module
  • SFP transceiver
  • XFP transceiver

Note: Uplink modules are not part of the standard package and must be ordered separately.

The power supply, fan tray, SFP transceiver, and XFP transceiver in EX-series switches are hot-removable and hot-insertable FRUs: you can remove and replace them without powering off the switch or disrupting switch functions. The uplink module is not hot-removable or hot-insertable: you must power off the switch before removing or installing it.

Note: If you have a Juniper J-Care service contract, register any addition, change, or upgrade of hardware components at https://www.juniper.net/customers/csc/management/updateinstallbase.jsp. Failure to do so can result in significant delays if you need replacement parts. This note applies if you change the type of power supply or add a new type of uplink module. It does not apply if you replace these components with the same type of component.

[an error occurred while processing this directive]