Technical Documentation

Tools and Parts Required to Remove Components from the JCS 1200 Platform

To remove components from the platform or the platform from a rack, you need the following tools and parts:

  • 2.5-mm flat-blade (–) screwdriver, for detaching alarm relay terminal block
  • 10-mm. hexagonal-head external drive socket wrench, or nut driver
  • 3/8-in. nut driver
  • 7/16-in. nut driver
  • Blank panels to cover empty slots
  • Electrostatic bag or antistatic mat, for each component
  • Electrostatic discharge (ESD) grounding wrist strap
  • Flat-blade (–) screwdriver
  • Mechanical lift, if available
  • Phillips (+) screwdrivers, numbers 1 and 2
  • Rubber safety cap for fiber-optic PICs or PIC cable
  • Wire cutters