JCS 1200 Hardware Component Installation Guidelines
Before you install any modules or fillers in the JCS 1200 platform, read the following information:
- Read the safety information in Safety Requirements, Warnings, and Guidelines for Installing the JCS 1200 Platform. This information will help you work safely.
- Orange on a component or an orange label on or near a component indicates that the component is hot-swappable, which means that you can remove or install the component while the JCS 1200 platform is running. (Orange can also indicate touch points on hot-swappable components.) See the instructions for removing or installing a specific hot-swappable component for any additional procedures that you might have to perform before you remove or install the component.
- You do not have to disconnect the JCS 1200 platform from power to install or replace any of the hot-swappable modules in the JCS 1200 platform. You must shut down the operating system and power off a Routing Engine before you remove the Routing Engine, but you do not have to shut down the JCS 1200 platform itself (see Powering Off a JCS 1200 Routing Engine).
- Blue on a component indicates touch points where you can grip the component to open and close a latch or where you can grab a component to remove it from or install it into the JCS 1200 platform.