[an error occurred while processing this directive] [an error occurred while processing this directive]

SRX 210 Services Gateway Chassis

The SRX 210 services gateway chassis is a rigid sheet metal structure that houses all the other hardware components.

Table 1 provides information on the physical specifications of the device.

Table 1: Physical Specifications for the SRX 210 Services Gateway

Physical Specification

Value

Chassis height

1 Rack Unit (RU)

Chassis width

11 in. (280 mm)

Chassis depth

7 in. (179 mm)

Chassis weight

TBD

Graphic is TBD.

Caution: Before removing or installing components of a functioning services gateway, attach an electrostatic discharge (ESD) strap to an ESD point and place the other end of the strap around your bare wrist. Failure to use an ESD strap could result in damage to the services gateway.

The services gateway must be connected to earth ground during normal operation. The protective earthing terminal on the rear of the chassis is provided to connect the services gateway to ground (see Figure xx on page x — TBD). Additional grounding is provided to an AC-powered services gateway when you plug its power supply into a grounded AC power receptacle.

[an error occurred while processing this directive]