Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Removing a TCX1000-RDM20 from a Rack or Cabinet

 

If you need to remove a TCX1000-RDM20 to return it or relocate an installed TCX1000-RDM20, perform the following procedure. (The remainder of this topic uses rack to mean rack or cabinet.)

Note

When you remove multiple devices from a rack, remove the device in the top of the rack first and proceed to remove the rest of the devices from top to bottom to avoid toppling the rack.

Note

This procedure requires two persons. Do not attempt to do it alone.

Before removing a TCX1000-RDM20 from a rack:

Ensure that you have the following tool available:

  • Screwdriver appropriate for your rack-mounting screws.

To remove a TCX1000-RDM20 from a rack:

  1. Use a screwdriver to remove the mounting screws that attach the chassis mounting brackets to the rack or cabinet.
  2. Remove the TCX1000-RDM20 from the rack.
  3. Transport the TCX1000-RDM20 to your desired new location or pack it to prepare to return (see Returning a Hardware Component to Juniper Networks, Inc.).