TCX1000-RDM20 Management Port LEDs
The management port—labeled
ETH CRAFT—on the TCX1000-RDM20 is located on the management panel.
DCN 0 and
DCN 1 are Ethernet ports
for local management.
The management port is an Ethernet port that supports an RJ-45 connector and has separate LEDs for status and activity. Figure 1 shows the location of the LEDs.
LEDS for ETH CRAFT
LEDs for DCN 1
LEDs for DCN 0
Table 1 describes the RJ-45 management port LEDs.
Table 1: TCX1000-RDM20 RJ-45 Management Port LEDs
Link (left of receptacle)
No link is established, there is a fault, or the link is down.
Link is up.
Status (right of receptacle)
Link is down.
There is data activity.