Changing the IP Address of the Timing Server using the CLI

The Timing Server is assigned a default IP address by the manufacturer to allow access to the unit for the first time. The IP address should be changed prior to installing on a network. See Reserving an IP Address for the TCA8000 or TCA8500 Timing Server for additional information on how to reserve an IP address for the Timing Server. This section describes how to connect the Timing Server to a computer and how to use the CLI to change the IP address.

To use the CLI to change the default IP address of the Timing Server:

  1. Using the computer which is connected to the Timing Server, click the Start button and choose Run from the menu. The Run dialog box appears.
  2. In the Open field, enter the following:
    telnet 192.168.0.75
  3. Click the OK button.
  4. A DOS window appears
  5. At the User name prompt, type the user name and press Enter.
  6. At the Password prompt, type the corresponding password and press Enter.
  7. At the prompt, type enable and press Enter.
  8. At the password prompt, type enable and press Enter.
  9. At the prompt, type config eth0/1 ip (LAN1 and LAN2 ports, respectively) and press Enter.
  10. At the IP address prompt, enter the IP address to be assigned to the unit and press Enter. The current IP address is shown in the brackets <>.
  11. At the prompt, type exit, save your changes, and exit enable mode or type help to view additional commands.