Options That You Can View in the CLI

To list the options that can be viewed, type help after the CLI session has started. Table 34 lists the options that can be viewed.

Table 34: CLI Viewing Options

Command

Description

Supported Users

help

Displays available list of commands

  • Admin
  • Read/Write
  • Read-Only

quit

Disconnect

  • Admin
  • Read/Write
  • Read-Only

logout

Disconnect

  • Admin
  • Read/Write
  • Read-Only

exit

Exits from current mode

  • Admin
  • Read/Write
  • Read-Only

history

Displays a list of previously run commands

  • Admin
  • Read/Write
  • Read-Only

enable

Turns on privileged commands

  • Admin
  • Read/Write

show syslog

Displays system log {num of lines}

  • Admin
  • Read/Write
  • Read-Only

show eventlog

Displays event log {num of lines}

  • Admin
  • Read/Write
  • Read-Only

show authlog

Displays authorization log {num of lines}

  • Admin
  • Read/Write
  • Read-Only

show daemonlog

Displays daemon log {num of lines}

  • Admin
  • Read/Write
  • Read-Only

show alarm all

Displays all active alarms

  • Admin
  • Read/Write
  • Read-Only

show alarm E1

Displays only E1 active alarms

  • Admin
  • Read/Write
  • Read-Only

show sysinfo

Displays system information

  • Admin
  • Read/Write
  • Read-Only

show network

Displays network information

  • Admin
  • Read/Write
  • Read-Only

show snmp

Displays snmp configuration information

  • Admin
  • Read/Write
  • Read-Only

show snmp-trap

Displays trap receivers information

  • Admin
  • Read/Write
  • Read-Only

show snmp-v3 user

Displays snmp v3 user information

  • Admin
  • Read/Write
  • Read-Only

show alarm-email-receiver

Displays alarm’s email receivers

  • Admin
  • Read/Write
  • Read-Only

show alarm-profile

Displays alarm’s profile information

  • Admin
  • Read/Write
  • Read-Only

show session

Displays web and CLI configuration session information

  • Admin
  • Read/Write
  • Read-Only

show partition

Displays software image information on different partitions

  • Admin
  • Read/Write
  • Read-Only

show gps

Displays GPS status including Receiver and Antenna status, location, number of satellites and their signal strengths

  • Admin
  • Read/Write
  • Read-Only

show time

Displays Time Sync Source, its quality, state, and Stratum

  • Admin
  • Read/Write
  • Read-Only

show frequency

Displays Frequency Sync Source, its quality, state, Stratum, and Oscillator Type in the system.

  • Admin
  • Read/Write
  • Read-Only

show sync-src-priority

Displays the current Sync Source priority list

  • Admin
  • Read/Write
  • Read-Only

show E1 status

Displays status of all E1 input and output ports

  • Admin
  • Read/Write
  • Read-Only

show E1 config

Displays current port configuration for all E1 input and output ports

  • Admin
  • Read/Write
  • Read-Only

show timing-output

Displays timing output information for PPS, IRIG-B, 1/5/10MHz output ports

  • Admin
  • Read/Write
  • Read-Only

show irig-b

Displays IRIG-B output format

  • Admin
  • Read/Write
  • Read-Only

show ptp config

Displays PTP configuration information, including mode, domain, profile used, one vs. two-step, and Delay Request, Announce, and Sync Packet intervals

  • Admin
  • Read/Write
  • Read-Only

show ptp status

Displays PTP stack status

  • Admin
  • Read/Write
  • Read-Only

show ptp stat

Displays statistics on PTP packets

  • Admin
  • Read/Write
  • Read-Only

show ptp default-dataset

Displays the PTP parameter including domain number that is configured

  • Admin
  • Read/Write
  • Read-Only

show ptp parent-dataset

Displays Grandmaster priority settings and other Grandmaster parameters

  • Admin
  • Read/Write
  • Read-Only

show license

Displays information on Software Licensable features

  • Admin
  • Read/Write
  • Read-Only

show telecom-standard

Displays the telecom standard set for the telecom profile

  • Admin
  • Read/Write
  • Read-Only

show holdover-state

Indicates whether the TCA system remains in the holdover state or changes to the internal state after 24 hours of holdover state

  • Admin
  • Read/Write
  • Read-Only

show radius-server

Displays the details of the configured RADIUS authentication servers

  • Admin
  • Read/Write
  • Read-Only

show auth-order

Displays the configured authentication order

  • Admin
  • Read/Write
  • Read-Only

show accounting-server

Displays the details of the configured RADIUS accounting servers

  • Admin
  • Read/Write
  • Read-Only

show accounting-level

Displays the type of information to be accounted

  • Admin
  • Read/Write
  • Read-Only

show accounting-status

Displays the current status of RADIUS accounting

  • Admin
  • Read/Write
  • Read-Only

show users

Displays details (username and class) of Read-Only and Read/Write users.

Admin

show user-history

Displays command history for users.

Note: The Read-Only or Read/Write users can use this command to view only command history of their sessions. The Admin user can use this command to view command history of all users.

  • Admin
  • Read/Write
  • Read-Only