Navigation
Back up to About Overview
[+] Expand All
[-] Collapse All
A
- admin page
- agency compliance
- alarm-cut-off command
- alarms
- antenna
- mounting
- mounting conditions 1, 2
- mounting requirements
B
C
- clear alarm command
- clear all-unicast-entry command
- clear authlog command
- clear daemon log command
- clear eventlog command
- clear md5-key-entry command
- clear ptp-stat command
- clear syslog command
- CLI 1
- commands
- alarm-cut-off
- backup scp
- backup tftp
- backup-unicast scp
- backup-unicast tftp
- clear alarm
- clear authlog
- clear daemon log
- clear eventlog
- clear md5-key-entry
- clear ptp-stat
- clear syslog
- config 1/5MHz
- config accounting
- config accounting-level
- config accounting-server add
- config accounting-server del
- config alarm-email-receiver
- config alarm-profile
- config antenna-cable-delay-compensation
- config antenna-voltage
- config auth-order
- config change-password
- config cli-banner-file
- config cli-banner-text
- config cli-timeout
- config datetime
- config dns0
- config dns1
- config domain
- config dst
- config e1 output loopback
- config e1 output port
- config enable-password
- config eth0 auto-nego
- config eth0 duplex
- config eth0 ip
- config eth0 ip-mode
- config eth0 speed
- config eth1 auto-nego
- config eth1 duplex
- config eth1 ip
- config eth1 ip-mode
- config eth1 speed
- config gps anti-jamming
- config holdover-state
- config hostname
- config irig-b
- config language
- config lcd-config
- config ntp add broadcast
- config ntp add manycast_server
- config ntp del
- config ntp generate-md5-key-list
- config ntp reload-md5-key-list
- config password
- config protocol-support
- config ptp add server
- config ptp grandmaster
- config ptp start-announce
- config radius-server add
- config radius-server del
- config snmp contact
- config snmp readonly-community
- config snmp readwrite-community
- config snmp-trap add
- config snmp-trap del
- config snmp-v3user add
- config snmp-v3user del
- config snr
- config ssl-cert
- config ssl-key
- config static-route add
- config static-route del
- config sync-src-priority
- config sync-src-revertive
- config telecom-standard
- config timezone
- config unsecured-communication-protocols
- config user add
- config user class
- config user del
- config user password
- config web
- config web-mode
- config web-timeout
- Disable
- enable
- exit
- ftp
- halt
- help
- history
- logout
- ping
- quit
- reboot
- reset config
- reset password
- restart ntp
- restart ptp
- restore scp
- restore tftp
- restore-unicast scp
- restore-unicast tftp
- save active-md5-key-list scp
- save active-md5-key-list tftp
- save scp authlog
- save scp daemonlog
- save scp eventlog
- save scp syslog
- save tftp authlog
- save tftp daemonlog
- save tftp eventlog
- save tftp syslog
- scp
- show accounting-level
- show accounting-server
- show accounting-status
- show alarm all
- show alarm E1
- show alarm-email-receiver
- show alarm-profile
- show all-configuration
- show auth-order
- show authlog
- show cli-banner
- show daemonlog
- show dst-config
- show E1 config
- show E1 status
- show eventlog
- show frequency
- show gps
- show holdover-state
- show irig-b
- show license
- show network
- show ntp config
- show ntp current-active-md5-key-list
- show ntp current-new-md5-key-list
- show ntp status
- show partition
- show protocol-support
- show ptp config
- show ptp default-dataset
- show ptp parent-dataset
- show ptp stat
- show ptp status
- show radius-server
- show session
- show snmp
- show snmp-trap
- show snmp-v3 user
- show sync-src-priority
- show sync-src-revertive
- show sysinfo
- show syslog
- show telecom-standard
- show time
- show timing-output
- show user-history
- show users
- stop ntp
- tftp
- tftp license
- upload-md5-key-list scp
- upload-md5-key-list tftp
- compliance
- config 1/5MHz command
- config accounting
- config accounting-level
- config accounting-server add
- config accounting-server del
- config alarm-email-receiver command
- config alarm-profile command
- config antenna-cable-delay-compensation command
- config antenna-voltage command
- config auth-order
- config change-password
- config cli-banner-file
- config cli-banner-text
- config cli-timeout command
- config datetime command
- config dns0 command
- config dns1 command
- config domain command
- config dst command
- config e1 output loopback command
- config e1 output port command
- config enable-password command
- config eth0 auto-nego command
- config eth0 duplex command
- config eth0 ip command
- config eth0 ip-mode command
- config eth0 speed command
- config eth1 auto-nego command
- config eth1 duplex command
- config eth1 ip command
- config eth1 ip-mode command
- config eth1 speed command
- config gps anti-jamming command
- config holdover-state
- config hostname command
- config irig-b command
- config language command
- config lcd-config command
- config ntp add broadcast command
- config ntp add manycast_server command
- config ntp del command
- config ntp generate-md5-key-list command
- config ntp reload-md5-key-list command
- config page
- config password command
- config protocol-support command
- config ptp add server command
- config ptp gm announce-receipt-timeout command
- config ptp gm disable command
- config ptp gm domain command
- config ptp gm dscp command
- config ptp gm enable command
- config ptp gm priority1 command
- config ptp gm priority2 command
- config ptp gm profile command
- config ptp gm two-step command
- config ptp grandmaster command
- config ptp start-announce command
- config ptp unicast add command
- config ptp unicast announce-int-range command
- config ptp unicast continuous command
- config ptp unicast del command
- config ptp unicast delay-int-range command
- config ptp unicast sync-int-range command
- config radius-server add
- config radius-server del
- config snmp contact command
- config snmp readonly-community command
- config snmp readwrite-community command
- config snmp-trap add command
- config snmp-trap del command
- config snmp-v3user add command
- config snmp-v3user del command
- config snr command
- config ssl-cert command
- config ssl-key command
- config static-route add command
- config static-route del command
- config sync-src-priority command
- config sync-src-revertive command
- config telecom-standard command
- config timezone command
- config unsecured-communication-protocols command
- config user add
- config user class
- config user del
- config user password
- config web command
- config web-mode command
- config web-timeout command
- console cable
- conventions
- customer support 1, 2
D
- depth
- dimensions
- Disable command
- Dynamic SSL certificate
E
- e-mail lists
- elements
- EMC testing
- enable command
- enable mode password
- environmental specifications
- event log
- event states
- exit command
F
- factory defaults
- ftp command
G
- graphical user interface
H
- halt command
- hardware
- height
- help command
- history command
- humidity
I
- IEEE 1588-2008 SYNC LED
- input voltage
- installation instructions
- installation requirements
- IP address
K
L
- log page
- login class
- changing by Admin user
- login page
- logout command
M
- mounting conditions
- mounting requirements
N
P
- parameters
- password
- physical dimensions
- ping command
- port LEDs
- power
- PTP
Q
R
S
- safety testing
- save active-md5-key-list scp command
- save active-md5-key-list tftp command
- save scp authlog command
- save scp daemonlog command
- save scp eventlog command
- save scp syslog command
- save tftp authlog command
- save tftp daemonlog command
- save tftp eventlog command
- save tftp syslog command
- scp command
- show accounting-level
- show accounting-server
- show accounting-status
- show alarm all command
- show alarm E1 command
- show alarm-email-receiver command
- show alarm-profile command
- show all-configuration command
- show auth-order
- show authlog command
- show cli-banner command
- show daemonlog command
- show dst-config command
- show E1 config command
- show E1 status command
- show eventlog command
- show frequency command
- show gps command
- show holdover-state
- show irig-b command
- show license command
- show network command
- show ntp config command
- show ntp current-active-md5-key-list command
- show ntp current-new-md5-key-list command
- show ntp status command
- show partition command
- show protocol-support command
- show ptp config command
- show ptp default-dataset command
- show ptp parent-dataset command
- show ptp stat command
- show ptp status command
- show radius-server
- show session command
- show snmp command
- show snmp-trap command
- show snmp-v3 user command
- show sync-src-priority command
- show sync-src-revertive
- show sysinfo command
- show syslog command
- show telecom-standard command
- show time command
- show timing-output command
- show user-history
- show users
- SNMPv3
- software
- specifications
- SSH
- status page
- stop ntp command
- support
- support, technical See technical support
- system LEDs
T
U
- unpacking the chassis
- upgrading See software
- upload-md5-key-list scp
- upload-md5-key-list tftp
- user account
- admin password changing
- admin password reset
- creating Read-Only user
- creating Read/Write user
- deleting Read-Only user
- deleting Read/Write user
- guidelines
- management
- modifying
- overview
- Read-Only user password changing by Admin user
- Read/Write user password changing by Admin user
- Read/Write user password changing by Read/Write user
- user interface
W
Selecting Between the Pre-Installed Software Images Using the CLI
The TCA8000 and TCA8500 Timing Servers ship with both T1 and E1 software images installed in the two internal non-volatile memory partitions. By default, the TCA8000 and TCA8500 Timing Servers use the E1 interface type. Use the show partition command to display the active and backup software images. The CLI displays the current software image as Active.
To select an alternate software image using the CLI:
- Verify that the Timing Server is powered on.
- Connect to the Timing Server over a Telnet application.
>telnet 10.1.0.42 - Enter the login and password.
>login: adminPassword: admin - Issue the en command, and then enter enable as the password.
>enPassword: enable - Issue the show partition command to verify
that the software image appears in Partition 1.
# show partitionPartition 1: cern-2.1.2-2-PTP-E1 (Active) Partition 2: cern-2.1.2-2-PTP-T1
- To initiate the reboot, issue the reboot partition-number command where partition-number is the number of the partition you want to load. Type Y to confirm.
# reboot 2Are you sure you want> to reboot? y/n
>YThe appliance will reboot resulting in a “no service” condition.
 | Note: If the appropriate software image interface is not shown in either software image partitions, upgrade the in-active partition with the appropriate software image, and then perform the reboot as described in Upgrading the Software Using the CLI |
