Configuration Commands

The reference to eth0 (LAN1 port) is for the single TCA6000 Timing Client Ethernet port and the similar configuration is used for LAN2 (eth1).

eth0 speed

Configures the Ethernet port to either 10 or 100 Mbps. It is recommended to use 100 Mbps (default)

eth0 duplex

Configures the Ethernet port as half or full duplex. For performance requirements to be achieved, full duplex (default) is required.

eth0 auto-nego

Configures the Ethernet port as being able to auto negotiate the speed and half/full duplex (yes / no). It is recommended this be disabled (default), that is no.

eth0 ip

Configures the port IP address, IP Mask and Gateway. There is only one gateway for eth0 and eth1.

config eth0 ip 192.168.50.120 255.255.255.0 192.168.50.1
eth0 ip-mode

Configures the IP address as being a static or dynamic.

# config eth0 ip-mode static