Ethernet Port Network Configuration

The Ethernet port is required to be configured with the appropriate Ethernet and IP parameters. The TCA8000 Timing Server has two Ethernet ports. The LAN1 (eth0) is used for the IEEE1588v3 (PTP) network connectivity to the Timing Clients. For the out-of-band management network connectivity, i.e. telnet, web interface, SNMP, etc., either LAN1 (eth0) or LAN2 (eth1) can be used.

Note: You cannot configure Ethernet and VLAN port addresses to be in the same subnet (that is, all logical and physical interfaces should be configured to be in different subnets).