Options That You Can View in the CLI

To list the options that can be viewed, type help after the CLI session has started. Table 34 lists the options that can be viewed.

Table 34: CLI Viewing Options

Command

Description

Supported Users

enable

Turns on privileged commands

  • Admin
  • Read/Write

exit

Exits from current mode

  • Admin
  • Read/Write
  • Read-Only

help

Displays available list of commands

  • Admin
  • Read/Write
  • Read-Only

history

Displays a list of previously run commands

  • Admin
  • Read/Write
  • Read-Only

logout

Disconnect

  • Admin
  • Read/Write
  • Read-Only

quit

Disconnect

  • Admin
  • Read/Write
  • Read-Only

show 1/5/10MHz

Displays 1/5/10 MHz settings

  • Admin
  • Read/Write
  • Read-Only

show accounting-level

Displays the type of information to be accounted

  • Admin
  • Read/Write
  • Read-Only

show accounting-server

Displays the details of the configured RADIUS accounting servers

  • Admin
  • Read/Write
  • Read-Only

show accounting-status

Displays the current status of RADIUS accounting

  • Admin
  • Read/Write
  • Read-Only

show alarm all

Displays all active alarms

  • Admin
  • Read/Write
  • Read-Only

show alarm-email-receiver

Displays alarm’s e-mail receivers

  • Admin
  • Read/Write
  • Read-Only

show alarm-profile

Displays alarm’s profile information

  • Admin
  • Read/Write
  • Read-Only

show alarm t1

Displays only T1 active alarms

  • Admin
  • Read/Write
  • Read-Only

show auth-order

Displays the configured authentication order

  • Admin
  • Read/Write
  • Read-Only

show authlog

Displays authorization log {num of lines}

  • Admin
  • Read/Write
  • Read-Only

show daemonlog

Displays daemon log {num of lines}

  • Admin
  • Read/Write
  • Read-Only

show eventlog

Displays event log {num of lines}

  • Admin
  • Read/Write
  • Read-Only

show frequency

Displays frequency status

  • Admin
  • Read/Write
  • Read-Only

show gps

Displays GPS software and hardware status

  • Admin
  • Read/Write
  • Read-Only

show holdover-state

Indicates whether the TCA system remains in the holdover state or changes to the internal state after 24 hours of holdover state

  • Admin
  • Read/Write
  • Read-Only

show network

Displays network information

  • Admin
  • Read/Write
  • Read-Only

show partition

Displays partition information

  • Admin
  • Read/Write
  • Read-Only

show pps-squelch

Displays the status of the PPS squelch

  • Admin
  • Read/Write
  • Read-Only

show ppx

Displays PPS settings

  • Admin
  • Read/Write
  • Read-Only

show ptp config

Displays PTP configuration

  • Admin
  • Read/Write
  • Read-Only

show ptp default-dataset

Displays the PTP parameter including domain number that is configured

  • Admin
  • Read/Write
  • Read-Only

show ptp parent-dataset

Displays Grandmaster priority settings and other Grandmaster parameters

  • Admin
  • Read/Write
  • Read-Only

show ptp stat

Displays PTP statistics

  • Admin
  • Read/Write
  • Read-Only

show ptp status

Displays PTP status

  • Admin
  • Read/Write
  • Read-Only

show radius-server

Displays the details of the configured RADIUS authentication servers

  • Admin
  • Read/Write
  • Read-Only

show session

Displays session information

  • Admin
  • Read/Write
  • Read-Only

show snmp

Displays SNMP configuration information

  • Admin
  • Read/Write
  • Read-Only

show snmp-trap

Displays trap receivers information

  • Admin
  • Read/Write
  • Read-Only

show snmp-v3 user

Displays SNMPv3 user information

  • Admin
  • Read/Write
  • Read-Only

show sync-src-priority

Displays time status

  • Admin
  • Read/Write
  • Read-Only

show sysinfo

Displays system information

  • Admin
  • Read/Write
  • Read-Only

show syslog

Displays system log {num of lines}

  • Admin
  • Read/Write
  • Read-Only

show t1 config

Displays T1 port configuration

  • Admin
  • Read/Write
  • Read-Only

show t1 status

Displays T1 status

  • Admin
  • Read/Write
  • Read-Only

show time

Displays time status

  • Admin
  • Read/Write
  • Read-Only

show time-probe

Displays status of licensable features such as time probe agent

  • Admin
  • Read/Write
  • Read-Only

show timing-output

Displays timing output information

  • Admin
  • Read/Write
  • Read-Only

show user-history

Displays command history for users.

Note: The Read-Only or Read/Write users can use this command to view only command history of their sessions. The Admin user can use this command to view command history of all users.

  • Admin
  • Read/Write
  • Read-Only

show users

Displays details (username and class) of Read-Only and Read/Write users.

Admin