Selecting Between the Pre-Installed Software Images Using a Web GUI/Browser

The TCA6000 and TCA6500 Timing Clients ship with both T1 and E1 software images installed in the two internal non-volatile memory partitions. By default, the TCA6000 and TCA6500 Timing Clients use the E1 interface type. You can view the software images from the Timing Client Admin web interface page (see Figure 18). The active software image is displayed as (Active) in the Halt and Reboot System drop-down menu.

To select an alternate software image using the Web-based GUI:

Verify that the Timing Client is powered on.
Enter the IP address of the Timing Client into a web browser.
For example, https://10.1.0.42.
Log in to the Timing Client as admin.
Login: admin
Password: admin
Select the Admin tab from the menu on the left.
Select the required interface from the drop-down menu.
Select the Reboot option.
Click Apply to reboot the Timing Client.
Select Yes when prompted with the dialog box stating “Do you confirm a system reboot system?” The Timing Client reboots and loads the selected software image.

Note: If the appropriate software image interface is not shown in either software image partitions, upgrade the in-active partition with the appropriate software image, and then perform the reboot as described in Upgrading the Software Using a Web GUI/Browser.