Configuring RADIUS Accounting

The TCA6000 and TCA6500 Timing Clients support RADIUS accounting for the user logged in to the Timing Client. Once the user is logged in to the Timing Client, the Timing Client passes the accounting information to the configured RADIUS accounting servers. The Timing Client stops the accounting process when the user session is closed either voluntarily or involuntarily. The Timing Client waits for acknowledgment from the accounting servers for each accounting packet.

When the RADIUS accounting is enabled, the Timing Client tries to log the accounting information in any one of the configured RADIUS accounting server based on the configured timeout period and number of retries. When the logging of accounting information fails for all configured accounting server, the Timing Client raises an ACCOUNTING_SERVER_UNAVAILABLE alarm.

When the RADIUS accounting server is unavailable, the accounting information (latest 15 commands) is buffered. The Timing Client sends the buffered information to the RADIUS accounting server after the server becomes available.

The accounting process supports login accounting, interactive commands accounting, and configuration commands accounting.

Note:

  • The selection of RADIUS accounting server to log the accounting information is based on the order in the RADIUS accounting server list.
  • The accounting process is implemented only for the Accounting Request and Accounting Response messages.
  • The RADIUS accounting is not supported for shell users.
  • The accounting process does not support immediate accounting and accounting of web configurations.

The usage of RADIUS accounting servers provides the following advantages:

To configure RADIUS accounting:

  1. Click the Config tab.
  2. Locate the RADIUS tab across the top tabs of the Config page. See Figure 14.

    Figure 14: Timing Client Config Page—RADIUS Pane (Accounting)

    Timing Client Config Page—RADIUS Pane (Accounting)
  3. In the RADIUS Accounting Status field, select the Enable option to enable RADIUS accounting.
  4. Click the Apply button to apply RADIUS accounting status configuration.
  5. Configure the RADIUS accounting server details
  6. Click the Save button to save the accounting server configuration.
  7. In the RADIUS Accounting Level field, select the type of accounting information to be logged in the RADIUS accounting server.
  8. Click the Apply button to apply the configured RADIUS accounting level.

The following section describe RADIUS accounting server configuration:

Adding a New RADIUS Accounting Server Entry

To add a new RADIUS accounting server entry to the accounting server list:

  1. Click the Config tab.
  2. Locate the RADIUS tab across the top tabs of the Config page. See Figure 14.
  3. In the Server IP field, enter the IP address of the RADIUS accounting server to be used for accounting.
  4. In the Port field, enter the port through which the specified RADIUS accounting server is contacted for accounting.
  5. In the Retry field, enter the number of attempts should be made for contacting the specified RADIUS accounting server.
  6. In the Timeout field, enter the time in seconds till which the Timing Client waits for a response from the specified RADIUS accounting server.
  7. In the Secret Word field, enter the password shared with the specified RADIUS accounting server.
  8. Click the Save button to add the RADIUS accounting server entry in the RADIUS Accounting Servers window and memory.

Deleting a RADIUS Accounting Server Entry

To delete a RADIUS accounting server entry from the accounting server list:

  1. Click the Config tab.
  2. Locate the RADIUS tab across the top tabs of the Config page. See Figure 14.
  3. In the RADIUS Accounting Servers window, click the RADIUS accounting server entry to be deleted.
  4. Click the Delete button to remove the entry from the RADIUS Accounting Servers window and memory.

Modifying a RADIUS Accounting Server Entry Details

To modify the details of a RADIUS accounting server entry existing in the accounting server list:

  1. Click the Config tab.
  2. Locate the RADIUS tab across the top tabs of the Config page. See Figure 14.
  3. In the RADIUS Accounting Servers window, select the RADIUS accounting server entry to be modified.
  4. Click the Edit button to populate the values of the selected RADIUS accounting server entry in the Server IP, Port, Retry, Timeout, and Secret Word fields.
  5. Modify the populated values.
  6. Click the Save button to save the changes done in the selected RADIUS accounting server entry.