Navigation
Back up to About Overview
[+] Expand All
[-] Collapse All
A
- admin page
- agency compliance
- alarms
- antenna
- mounting
- mounting conditions 1, 2
- mounting requirements
B
C
- clear alarm command
- clear authlog command
- clear daemon log command
- clear eventlog command
- clear ptp-stat command
- clear syslog command
- CLI 1
- commands
- backup scp
- backup tftp
- clear alarm
- clear authlog
- clear daemon log
- clear eventlog
- clear ptp-stat
- clear syslog
- config 1/5MHz
- config accounting
- config accounting-level
- config accounting-server add
- config accounting-server del
- config alarm-email-receiver
- config alarm-profile
- config antenna-cable-delay-compensation
- config antenna-voltage
- config auth-order
- config change-password
- config cli-banner-file
- config cli-banner-text
- config cli-timeout
- config datetime
- config dns0
- config dns1
- config domain
- config dst
- config e1 output loopback
- config e1 output port
- config enable-password
- config eth0 auto-nego
- config eth0 duplex
- config eth0 ip
- config eth0 ip-mode
- config eth0 speed
- config gps anti-jamming
- config holdover-state
- config hostname
- config language
- config password
- config pps-squelch
- config ppx
- config primary-ptp-server
- config ptp add server
- config ptp slave
- config radius-server add
- config radius-server del
- config secondary-ptp-server
- config snmp contact
- config snmp readonly-community
- config snmp readwrite-community
- config snmp-trap add
- config snmp-trap del
- config snmp-v3user add
- config snmp-v3user del
- config snr
- config ssl-cert
- config ssl-key
- config sync-src-priority
- config timezone
- config unsecured-communication-protocols
- config user add
- config user class
- config user del
- config user password
- config web
- config web-mode
- config web-timeout
- ftp
- halt
- ping
- reboot
- reset config
- reset password
- restart ptp
- restart timeprobe-agent
- restore scp
- restore tftp
- save scp authlog
- save scp daemonlog
- save scp eventlog
- save scp syslog
- save tftp authlog
- save tftp daemonlog
- save tftp eventlog
- save tftp syslog
- scp
- tftp
- tftp license
- compliance
- config 1/5/10MHz command
- config accounting
- config accounting-level
- config accounting-server add
- config accounting-server del
- config alarm-email-receiver command
- config alarm-profile command
- config antenna-cable-delay-compensation command
- config antenna-voltage command
- config auth-order
- config change-password
- config cli-banner-file
- config cli-banner-text
- config cli-timeout command
- config datetime command
- config dns0 command
- config dns1 command
- config domain command
- config dst command
- config e1 output loopback command
- config e1 output port command
- config enable-password command
- config eth0 auto-nego command
- config eth0 duplex command
- config eth0 ip command
- config eth0 ip-mode command
- config eth0 speed command
- config gps anti-jamming command
- config holdover-state
- config hostname command
- config language command
- config page
- config password command
- config pps-squelch
- config ppx command
- config primary-ptp-server command
- config ptp add server command
- config ptp slave command
- config ptp slv disable command
- config ptp slv domain command
- config ptp slv dscp command
- config ptp slv enable command
- config ptp slv profile command
- config ptp unicast acc-master add command
- config ptp unicast acc-master del command
- config ptp unicast announce command
- config ptp unicast delay command
- config ptp unicast duration command
- config ptp unicast signaling command
- config ptp unicast sync command
- config radius-server add
- config radius-server del
- config secondary-ptp-server command
- config snmp contact command
- config snmp readonly-community command
- config snmp readwrite-community command
- config snmp-trap add command
- config snmp-trap del command
- config snmp-v3user add command
- config snmp-v3user del command
- config snr command
- config ssl-cert command
- config ssl-key command
- config sync-src-priority command
- config timezone command
- config unsecured-communication-protocols command
- config user add
- config user class
- config user del
- config user password
- config web command
- config web-mode command
- config web-timeout command
- console cable
- conventions
- customer support 1, 2
D
E
- e-mail lists
- elements
- EMC testing
- enable mode password
- environmental specifications
- event states
F
- factory defaults
- ftp command
G
- graphical user interface
H
- halt command
- hardware
- height
- humidity
I
- input voltage
- installation instructions
- installation requirements
- IP address
K
L
- log page
- login class
- changing by Admin user
- login page
M
N
P
- parameters
- password
- physical dimensions
- ping command
- port LEDs
- power
- PTP
R
S
- safety testing
- save scp authlog command
- save scp daemonlog command
- save scp eventlog command
- save scp syslog command
- save tftp authlog command
- save tftp daemonlog command
- save tftp eventlog command
- save tftp syslog command
- scp command
- SNMPv3
- software
- specifications
- SSH
- status page
- support
- support, technical See technical support
- system LEDs
T
U
- unpacking the chassis
- upgrading See software
- user account
- admin password changing
- admin password reset
- creating Read-Only user
- creating Read/Write user
- deleting Read-Only user
- deleting Read/Write user
- guidelines
- management
- modifying
- overview
- Read-Only user password changing by Admin user
- Read/Write user password changing by Admin user
- Read/Write user password changing by Read/Write user
- user interface
W
Configuring Alarms
How the TCA6000 or TCA6500 Timing Client handles alarms during normal operation can be specified. To configure the alarms:
- Click the Admin tab. The Admin page appears.
- Click the Alarm Profile tab. See Figure 8.
- For each alarm, the following parameters can be configured:
- Select the Clear Now check box to clear an alarm immediately. This only applies to non-transient (box gray filled) and not transient alarms.
- Select the Auto Clear check box to clear an alarm automatically after it has been active for the Auto Clear Expiration period of 1-24 hours. This only applies to non-transient (box gray filled) and not transient alarms.
- In the Severity field, select
the flag to accompany this alarm. Select:Critical
— Indicates the highest level alarm and is severely affecting traffic. This needs immediate attention. The following alarms are directly related to this level:
TE1_LOS, TE1_LOF, FREQ_FREERUN, LINK_DOWN
Major— Indicates this alarm needs immediate attention. The following alarms are recommended for this level:
PTP_SERVER_UNREACHABLE, LOSS_OF_POWER_FEED, FREQ_HOLDOVER
Minor— Indicates this alarm needs attention but is not urgent. The following alarms are recommended for this level:
SYS_CONFIG_CHANGE, TE1_AIS, TE1_RAI, PTP_SERVER_CHANGE, FREQ_REF_INPUT_CHANGE, FREQ_INPUT_QUALITY_CHANGE, LINK_DOWN, TIMING_OSC_DAC
None— Indicates this alarm is for information only. The following alarms are recommended for this level:
SYS_AUTHENTICATION, OVEN_TEMP_DEVIATION_HIGH, OVEN_TEMP_DEVIATION_LOW, LINK_UP, TIMEPROBE_DISABLE, FREQ_ACQUIRING
- Select the Send Trap check box. The Timing Client will send the alarm to the Trap destinations identified on the Config page.
- Select the Write Log check box. The Timing Client will send the alarm to the local log file.
- Select the Send to Email check box. The Timing Client will send an e-mail message about this alarm to the users identified in the Alarm E-mail Recipients section of the Alarm tab.
Figure 8: Timing Client Admin Page—Alarm Pane
