Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  
[+] Expand All
[-] Collapse All

 A  B  C  D  E  F  G  H  I  K  L  M  N  P  R  S  T  U  W

 

A

admin page    
accessing
alarm pane
config pane
description
password pane
service pane
understanding
upgrade pane
agency compliance
alarms    
configuring
event states
types
antenna    
mounting
mounting conditions    12
mounting requirements
 

B

backup scp command
backup tftp command
 

C

clear alarm command
clear authlog command
clear daemon log command
clear eventlog command
clear ptp-stat command
clear syslog command
CLI    1
configuring the Timing Client using
options    1
viewing
using to view configuration
using to view status
commands    
backup scp
backup tftp
clear alarm
clear authlog
clear daemon log
clear eventlog
clear ptp-stat
clear syslog
config 1/5MHz
config accounting
config accounting-level
config accounting-server add
config accounting-server del
config alarm-email-receiver
config alarm-profile
config antenna-cable-delay-compensation
config antenna-voltage
config auth-order
config change-password
config cli-banner-file
config cli-banner-text
config cli-timeout
config datetime
config dns0
config dns1
config domain
config dst
config e1 output loopback
config e1 output port
config enable-password
config eth0 auto-nego
config eth0 duplex
config eth0 ip
config eth0 ip-mode
config eth0 speed
config gps anti-jamming
config holdover-state
config hostname
config language
config password
config pps-squelch
config ppx
config primary-ptp-server
config ptp add server
config ptp slave
config radius-server add
config radius-server del
config secondary-ptp-server
config snmp contact
config snmp readonly-community
config snmp readwrite-community
config snmp-trap add
config snmp-trap del
config snmp-v3user add
config snmp-v3user del
config snr
config ssl-cert
config ssl-key
config sync-src-priority
config timezone
config unsecured-communication-protocols
config user add
config user class
config user del
config user password
config web
config web-mode
config web-timeout
ftp
halt
ping
reboot
reset config
reset password
restart ptp
restart timeprobe-agent
restore scp
restore tftp
save scp authlog
save scp daemonlog
save scp eventlog
save scp syslog
save tftp authlog
save tftp daemonlog
save tftp eventlog
save tftp syslog
scp
tftp
tftp license
compliance
config 1/5/10MHz command
config accounting
config accounting-level
config accounting-server add
config accounting-server del
config alarm-email-receiver command
config alarm-profile command
config antenna-cable-delay-compensation command
config antenna-voltage command
config auth-order
config change-password
config cli-banner-file
config cli-banner-text
config cli-timeout command
config datetime command
config dns0 command
config dns1 command
config domain command
config dst command
config e1 output loopback command
config e1 output port command
config enable-password command
config eth0 auto-nego command
config eth0 duplex command
config eth0 ip command
config eth0 ip-mode command
config eth0 speed command
config gps anti-jamming command
config holdover-state
config hostname command
config language command
config page    
accessing
description
E1 pane
network pane
profile pane
PTP pane
RADIUS pane
SNMPv3 pane
timing pane
trap pane
understanding
Users pane
config password command
config pps-squelch
config ppx command
config primary-ptp-server command
config ptp add server command
config ptp slave command
config ptp slv disable command
config ptp slv domain command
config ptp slv dscp command
config ptp slv enable command
config ptp slv profile command
config ptp unicast acc-master add command
config ptp unicast acc-master del command
config ptp unicast announce command
config ptp unicast delay command
config ptp unicast duration command
config ptp unicast signaling command
config ptp unicast sync command
config radius-server add
config radius-server del
config secondary-ptp-server command
config snmp contact command
config snmp readonly-community command
config snmp readwrite-community command
config snmp-trap add command
config snmp-trap del command
config snmp-v3user add command
config snmp-v3user del command
config snr command
config ssl-cert command
config ssl-key command
config sync-src-priority command
config timezone command
config unsecured-communication-protocols command
config user add
config user class
config user del
config user password
config web command
config web-mode command
config web-timeout command
console cable    
specifications
conventions    
notice icons
customer support    12
contacting JTAC
 

D

depth
dimensions    
physical
Dynamic SSL certificate    
overview
 

E

e-mail lists    
adding users
removing users
elements    
configurable in the CLI
EMC testing
enable mode password    
reset by resetting the Timing Client
reset via CLI
reset via GUI
environmental specifications
event states
 

F

factory defaults    
resetting
ftp command
 

G

graphical user interface    
using
 

H

halt command
hardware    
returning
height
humidity    
operating
 

I

input voltage
installation instructions    
Timing Client
installation requirements
IP address    
assigning
changing
reserving
 

K

knowledge base
 

L

log page    
accessing
AuthLog Pane
daemon Pane
description
EventLog Pane
SysLog Pane
understanding
login class    
changing by Admin user    
via GUI
login page    
accessing
description
understanding
 

M

mounting conditions    
minimal
optimal
 

N

notice icons
 

P

parameters    
configuring (CLI)
password    
changing for Admin user    
via CLI
via GUI    12
changing for Read-Only user by Admin user    
via GUI
changing for Read/Write user by Admin user    
via GUI
changing for Read/Write user by Read/Write user    
via GUI
reset for Admin user    
by resetting the Timing Client
via CLI
via GUI
physical dimensions
ping command
port LEDs
power    
consumption
specifications
PTP    
setting parameters
 

R

reboot command
requirements    
installing
mounting the antenna
upgrade
reset config command
reset password command
restart ptp command
restart timeprobe-agent command
restore scp command
restore tftp command
returns
RMA
 

S

safety testing
save scp authlog command
save scp daemonlog command
save scp eventlog command
save scp syslog command
save tftp authlog command
save tftp daemonlog command
save tftp eventlog command
save tftp syslog command
scp command
SNMPv3    
creating users
specifying contacts
software    
upgrading using the CLI
upgrading using the GUI
specifications    
console cable
environmental
power
SSH
status page    
accessing
alarm pane
description
E1 pane
GPS pane
PTP pane
system pane
timing pane
understanding
support
support, technical     See technical support    
system LEDs    
understanding
 

T

technical support    1
contacting JTAC
telnet
temperature    
operating
storage
tftp command
tftp license command
Timing Client    
accessing using the CLI
description
installing
stopping and restarting
troubleshooting
unpacking
visually testing
traps    
configuring
creating targets
deleting targets
 

U

unpacking the chassis
upgrading     See software    
user account    
admin password changing    
via CLI
via GUI    12
admin password reset    
by resetting the Timing Client
via CLI
via GUI
creating Read-Only user
creating Read/Write user
deleting Read-Only user    
via GUI
deleting Read/Write user    
via GUI
guidelines
management
modifying
overview
Read-Only user password changing by Admin user    
via GUI
Read/Write user password changing by Admin user    
via GUI
Read/Write user password changing by Read/Write user    
via GUI
user interface    
accessing
requirements for using
 

W

warranty
width

Elements that You Can Configure in the CLI

To list the elements that you can configure using the CLI, type enable at the prompt and press Enter. Table 35 list the configurable elements that appear.

Table 35: Configurable Elements in the CLI

Command

Description

Supported Users

backup tftp

Backs up the configuration file to a TFTP server.

Admin

backup scp

Backs up the configuration file (config.dat) in the specified path of the SCP server.

Note:

  • The file path and username should not contain any space characters.
  • The maximum length of the CLI command should not exceed 124 characters.

Admin

clear alarm

Clears the alarm.

  • Admin
  • Read/Write

clear authlog

Clears authorization log.

Admin

clear daemon log

Clears daemon log.

Admin

clear eventlog

Clears event log.

Admin

clear ptp-stat

Clears the PTP statistics.

  • Admin
  • Read/Write

clear syslog

Clears system log.

Admin

config 1/5/10MHz

Selects between 1 MHz, 5 MHz, and 10 MHz output on the 1/5/10 MHz port.

  • Admin
  • Read/Write

config accounting

Enables or disables RADIUS accounting in the Timing Client.

  • Admin
  • Read/Write

config accounting-level

Configures the information to be used by the Timing Client for accounting. The values are:

  • 1—For login accounting only
  • 2—For interactive and login accounting
  • 3—For configuration, interactive and login accounting
  • Admin
  • Read/Write

config accounting-server add

Adds the IP address of the RADIUS accounting server and sets other related configurations (secret word, retries, timeout, and port) to be used by the Timing Client for accounting.

  • Admin
  • Read/Write

config accounting-server del

Deletes the RADIUS accounting server and its configuration from the accounting server list by using the IP address of the accounting server.

  • Admin
  • Read/Write

config alarm-email-receiver

Configures recipients of alarm e-mail notifications.

  • Admin
  • Read/Write

config alarm-profile

Configures the alarm profile.

Admin

config antenna-cable-delay-compensation

Configures a delay compensation value in the range of -10000 through 10000 nanoseconds to compensate antenna cable delay.

Note: You are advised to enter:

  • A negative delay compensation value to compensate the positive delay introduced by the cable.
  • A positive delay compensation value to advance the PPS output delay relative to the absolute value.
  • Admin
  • Read/Write

config antenna-voltage

Configures the input voltage for the antenna as 3.3V or 5V.

  • Admin
  • Read/Write

config auth-order

Configures the authentication order to be followed by the Timing Client while authenticating an user. The following combination of authentication order is allowed:

  • RADIUS server authentication and then local authentication
  • Local authentication and then RADIUS server authentication
  • Only RADIUS server authentication
  • Only local authentication
  • Admin
  • Read/Write

config change-password

Modifies your current login password.

Read/Write

config cli-banner-file

Downloads the specified text file from the mentioned path of the configured Secure Copy Protocol (SCP) server to the /etc/config/cli_banner.txt path for customizing the CLI banner.

The downloaded file should be a plain text file. On rebooting, the TCA system checks for the cli_banner.txt file and displays the content in the file as CLI banner.

Note:

  • The file cannot be downloaded from TFTP and FTP servers.
  • The TCA system supports only 1024 characters (including spaces and new line characters) for the downloaded file, so the TCA system would truncate any extra characters in the file.
  • The TCA system detects all special characters in the downloaded file as normal strings.
  • The TCA system displays the default hard coded CLI banner, if no customized CLI banner is configured.
  • The TCA system displays an empty banner, if the cli_banner.txt file is empty.

Admin

config cli-banner-text

Configures a customized CLI banner. The CLI banner text that you have provided in this command is stored in the cli_banner.txt file in the /etc/config path. On rebooting, the TCA system checks for the cli_banner.txt file and displays the content in the file as CLI banner.

The maximum length of the CLI banner text that you can enter in this command is 100 characters, which include spaces and special characters. You can also use special characters (such as \n. \v, \t, and so on) to format the CLI banner text provided in this command.

Note:

  • If the cli_banner.txt file is available and already contains any content, then the existing content is replaced with the provided content.
  • You should avoid using the following special characters in the CLI banner text: |, “, and ‘.
  • The TCA system displays the default hard coded CLI banner, if no customized CLI banner is configured.
  • The TCA system displays an empty banner, if the cli_banner.txt file is empty.

Admin

config cli-timeout

Configures the session in-action session timeout.

  • Admin
  • Read/Write

config datetime

Configures date and time for the Timing Client.

  • Admin
  • Read/Write

config dns0

Configures the primary DNS server IP.

  • Admin
  • Read/Write

config dns1

Configures the second DNS server IP.

  • Admin
  • Read/Write

config domain

Configures the domain. {domain name}

  • Admin
  • Read/Write

config dst

Configures offset, starting date and time, and ending date and time for DST.

  • Admin
  • Read/Write

config e1 output loopback

Configures the E1 input port’s number of ports, mode, framing, encoding, Receive Sensitivity, SSM, and state.

  • Admin
  • Read/Write

config e1 output port

Configures the E1 output port’s number of ports, mode, framing, encoding, LBO, SSM, state, and framer generation.

Note: The framer generation setting is available only when the Timing Client uses T1 interface type.

  • Admin
  • Read/Write

config enable-password

Modifies the password of the enable mode.

Admin

config eth0 auto-nego

Turns Auto Negotiation ON or OFF for Ethernet 0 (LAN1) port.

  • Admin
  • Read/Write

config eth0 duplex

Selects the duplex mode for the Ethernet 0 (LAN1) port between half or full duplex.

  • Admin
  • Read/Write

config eth0 ip

Configures IP settings for Ethernet 0 (LAN1) port : IP address, mask, and gateway.

  • Admin
  • Read/Write

config eth0 ip-mode

Selects the IP mode for the Ethernet 0 (LAN1) port between Static and DHCP.

  • Admin
  • Read/Write

config eth0 speed

Selects the speed for the Ethernet 0 (LAN1) port between 10 and 100 Mbps.

  • Admin
  • Read/Write

config gps anti-jamming

Enables or disables the anti-jamming capability for the Resolution SMT GPS Timing Receiver.

Note: This command is available only if the TCA6500 Timing Client uses the Resolution SMT GPS Timing Receiver.

  • Admin
  • Read/Write

config holdover-state

Configures the TCA system to remain in the holdover state or change to the internal state after 24 hours of holdover state.

  • 1—The system remains in the holdover state instead of changing to the internal state after 24 hours of holdover state. However, the system changes to the internal state when the signal is lost during acquisition, locking, or resetting the system.
  • 0 (default)—The system changes to the internal state after 24 hours of holdover state.
  • Admin
  • Read/Write

config hostname

Configures the hostname. {hostname}

Admin

config language

Configures the webpages language.

  • Admin
  • Read/Write

config password

Modifies your current login password.

Admin

config pps-squelch

Turns on or off the PPS squelch.

  • On—The PPS squelch is turned on, thereby disabling the PPS output when the TCA system is not locked to GPS or PTP.
  • Off (default)—The PPS squelch is turned off, thereby enabling the PPS output even when the TCA system is not locked to GPS or PTP.
  • Admin
  • Read/Write

config ppx

Configures PPx.

  • Admin
  • Read/Write

config primary-ptp-server

Configures the primary (PTP) proprietary packet based timing protocol.

  • Admin
  • Read/Write

config ptp add server

Adds a PTP server.

  • Admin
  • Read/Write

config ptp slave

Configures PTP slave.

  • Admin
  • Read/Write

config ptp slv disable

Disables the PTP protocol.

  • Admin
  • Read/Write

config ptp slv domain

Configures the PTP domain number to be part of the same Grandmasters domain.

  • Admin
  • Read/Write

config ptp slv dscp

Configures the Differential Service (DiffServ) of the IP packet.

  • Admin
  • Read/Write

config ptp slv enable

Enables the PTP protocol.

  • Admin
  • Read/Write

config ptp slv profile

Configures the profile for unicast packet types for both sync and delay request / response PTP event messages.

  • Admin
  • Read/Write

config ptp unicast acc-master add

Adds the IP address of the acceptable Grandmasters for the Timing Client, which is used for the Ethernet network packet IP protocol.

  • Admin
  • Read/Write

config ptp unicast acc-master del

Deletes the IP address of the acceptable Grandmasters for the Timing Client, which is used for the Ethernet network packet IP protocol.

  • Admin
  • Read/Write

config ptp unicast announce

Configures the announce message rate that the Timing Client requests from the Grandmaster.

  • Admin
  • Read/Write

config ptp unicast delay

Configures the delay response message rate that the Timing Client requests from the Grandmaster.

  • Admin
  • Read/Write

config ptp unicast duration

Configures the Timing Client expiration duration for sending signaling messages without receiving an acknowledgement from the Grandmaster.

  • Admin
  • Read/Write

config ptp unicast signaling

Enables or disables the sending of the signaling messages to the Grandmaster.

  • enable—Enables the sending of the signaling messages to the Grandmaster.
  • disable—Disables the sending of the signaling messages to the Grandmaster.
  • Admin
  • Read/Write

config ptp unicast sync

Configures the sync message rate that the Timing Client requests from the Grandmaster.

  • Admin
  • Read/Write

config radius-server add

Adds the IP address of the RADIUS authentication server and sets other related configurations (secret word, retries, timeout, and port) to be used by the Timing Client for user authentication.

  • Admin
  • Read/Write

config radius-server del

Deletes the RADIUS authentication server and its configuration from the authentication server list by using the IP address of the authentication server.

  • Admin
  • Read/Write

config secondary-ptp-server

Configures the secondary (PTP) proprietary packet based timing protocol.

  • Admin
  • Read/Write

config snmp contact

Configures the SNMP contact.

  • Admin
  • Read/Write

config snmp readonly-community

Configures the SNMP read only community.

  • Admin
  • Read/Write

config snmp readwrite-community

Configures the SNMP read and write community.

  • Admin
  • Read/Write

config snmp-trap add

Adds a trap receiver address to the list.

  • Admin
  • Read/Write

config snmp-trap del

Deletes a trap receiver from the list.

  • Admin
  • Read/Write

config snmp-v3user add

Adds a SNMPv3 user.

  • Admin
  • Read/Write

config snmp-v3user del

Deletes a SNMPv3 user.

  • Admin
  • Read/Write

config snr

Selects SNR units between AMU or dBHz.

Note: This command is not available if the TCA6500 Timing Client uses the Resolution SMT GPS Timing Receiver. The AMU is not an industry standard unit of measurement.

  • Admin
  • Read/Write

config ssl-key

Downloads the specified SSL key file from the mentioned path of the configured SCP server. For more information about the dynamic SSL certificate support, see Dynamic SSL Certificate Overview.

Note:

  • The file cannot be downloaded from TFTP and FTP servers.
  • You must download the corresponding certificate file.
  • The file path and username should not contain any space characters.

Admin

config ssl-cert

Downloads the specified SSL certificate file from the mentioned path of the configured SCP server. For more information about the dynamic SSL certificate support, see Dynamic SSL Certificate Overview.

Note:

  • The file cannot be downloaded from TFTP and FTP servers.
  • You must download the corresponding key file.
  • The file path and username should not contain any space characters.

Admin

config sync-src-priority

Configures the highest priority Sync Source that the Timing Client should use. Choices include: PTP or Internal.

  • Admin
  • Read/Write

config timezone

Configures the time zone information.

  • Admin
  • Read/Write

config unsecured-communication-protocols

Enables or disables unsecured transfer or communication protocols such as ICMP, TFTP, FTP, and Telnet protocol. The values are:

  • 1—Specifies the ICMP.
  • 2—Specifies the TFTP.
  • 3— Specifies the FTP.
  • 4—Specifies the Telnet protocol.
  • 5—Specifies all the preceding protocols.

By default, all the unsecured transfer or communication protocols are enabled.

  • Admin

config user add

Creates a new user account with login class as Read-Only or Read/Write.

Admin

config user class

Modifies the login class for the Read-Only or Read/Write user account.

Admin

config user del

Deletes the Read-Only or Read/Write user account.

Admin

config user password

Creates a new password for the Read-Only or Read/Write user account.

Admin

config web

Configures the web enable/disable.

  • Admin
  • Read/Write

config web-mode

Configures the web mode.

Admin

config web-timeout

Configures the web-timeout. [min]

Admin

ftp

Installs the specified software image from the configured FTP server.

Admin

halt

Halts the system.

  • Admin
  • Read/Write

ping

Pings the remote host.

  • Admin
  • Read/Write

reboot

Reboots the system.

  • Admin
  • Read/Write

reset config

Restores the TCA6500 Timing Client to the manufacturer default configuration.

Admin

reset password

Restores the default password value.

Admin

restart timeprobe-agent

Starts or enables the time probe agent.

  • Admin
  • Read/Write

restart ptp

Starts PTP operations

Admin

restore tftp

Restores the configuration file from a TFTP server.

Admin

restore scp

Restores the configuration file from the mentioned path of the SCP server.

Note:

  • The file path and username should not contain any space characters.
  • The maximum length of the CLI command should not exceed 124 characters.

Admin

save tftp authlog

Saves the author log to a TFTP server.

  • Admin
  • Read/Write

save tftp daemonlog

Saves the daemon log to a TFTP server.

  • Admin
  • Read/Write

save tftp eventlog

Saves the event log to a TFTP server.

  • Admin
  • Read/Write

save tftp syslog

Saves the system log to a TFTP server.

  • Admin
  • Read/Write

save scp authlog

Saves the author log in the specified path of the SCP server.

Note:

  • The file path and username should not contain any space characters.
  • The maximum length of the CLI command should not exceed 124 characters.
  • Admin
  • Read/Write

save scp daemonlog

Saves the daemon log in the specified path of the SCP server.

Note:

  • The file path and username should not contain any space characters.
  • The maximum length of the CLI command should not exceed 124 characters.
  • Admin
  • Read/Write

save scp eventlog

Saves the event log in the specified path of the SCP server.

Note:

  • The file path and username should not contain any space characters.
  • The maximum length of the CLI command should not exceed 124 characters.
  • Admin
  • Read/Write

save scp syslog

Saves the system log in the specified path of the SCP server.

Note:

  • The file path and username should not contain any space characters.
  • The maximum length of the CLI command should not exceed 124 characters.
  • Admin
  • Read/Write

tftp

Installs a software upgrade image file by TFTP.

Admin

tftp license

Upload TFTP license for value-added features.

  • Admin
  • Read/Write

scp

Installs the specified software image from the mentioned path of the configured SCP server.

Note:

  • The file path and username should not contain any space characters.
  • The maximum length of the CLI command should not exceed 124 characters.

Admin

Modified: 2016-07-21