A
- admin page
- agency compliance
- alarms
- antenna
- mounting
- mounting conditions 1, 2
- mounting requirements
B
C
- clear alarm command
- clear authlog command
- clear daemon log command
- clear eventlog command
- clear ptp-stat command
- clear syslog command
- CLI 1
- commands
- backup scp
- backup tftp
- clear alarm
- clear authlog
- clear daemon log
- clear eventlog
- clear ptp-stat
- clear syslog
- config 1/5MHz
- config accounting
- config accounting-level
- config accounting-server add
- config accounting-server del
- config alarm-email-receiver
- config alarm-profile
- config antenna-cable-delay-compensation
- config antenna-voltage
- config auth-order
- config change-password
- config cli-banner-file
- config cli-banner-text
- config cli-timeout
- config datetime
- config dns0
- config dns1
- config domain
- config dst
- config e1 output loopback
- config e1 output port
- config enable-password
- config eth0 auto-nego
- config eth0 duplex
- config eth0 ip
- config eth0 ip-mode
- config eth0 speed
- config gps anti-jamming
- config holdover-state
- config hostname
- config language
- config password
- config pps-squelch
- config ppx
- config primary-ptp-server
- config ptp add server
- config ptp slave
- config radius-server add
- config radius-server del
- config secondary-ptp-server
- config snmp contact
- config snmp readonly-community
- config snmp readwrite-community
- config snmp-trap add
- config snmp-trap del
- config snmp-v3user add
- config snmp-v3user del
- config snr
- config ssl-cert
- config ssl-key
- config sync-src-priority
- config timezone
- config unsecured-communication-protocols
- config user add
- config user class
- config user del
- config user password
- config web
- config web-mode
- config web-timeout
- ftp
- halt
- ping
- reboot
- reset config
- reset password
- restart ptp
- restart timeprobe-agent
- restore scp
- restore tftp
- save scp authlog
- save scp daemonlog
- save scp eventlog
- save scp syslog
- save tftp authlog
- save tftp daemonlog
- save tftp eventlog
- save tftp syslog
- scp
- tftp
- tftp license
- compliance
- config 1/5/10MHz command
- config accounting
- config accounting-level
- config accounting-server add
- config accounting-server del
- config alarm-email-receiver command
- config alarm-profile command
- config antenna-cable-delay-compensation command
- config antenna-voltage command
- config auth-order
- config change-password
- config cli-banner-file
- config cli-banner-text
- config cli-timeout command
- config datetime command
- config dns0 command
- config dns1 command
- config domain command
- config dst command
- config e1 output loopback command
- config e1 output port command
- config enable-password command
- config eth0 auto-nego command
- config eth0 duplex command
- config eth0 ip command
- config eth0 ip-mode command
- config eth0 speed command
- config gps anti-jamming command
- config holdover-state
- config hostname command
- config language command
- config page
- config password command
- config pps-squelch
- config ppx command
- config primary-ptp-server command
- config ptp add server command
- config ptp slave command
- config ptp slv disable command
- config ptp slv domain command
- config ptp slv dscp command
- config ptp slv enable command
- config ptp slv profile command
- config ptp unicast acc-master add command
- config ptp unicast acc-master del command
- config ptp unicast announce command
- config ptp unicast delay command
- config ptp unicast duration command
- config ptp unicast signaling command
- config ptp unicast sync command
- config radius-server add
- config radius-server del
- config secondary-ptp-server command
- config snmp contact command
- config snmp readonly-community command
- config snmp readwrite-community command
- config snmp-trap add command
- config snmp-trap del command
- config snmp-v3user add command
- config snmp-v3user del command
- config snr command
- config ssl-cert command
- config ssl-key command
- config sync-src-priority command
- config timezone command
- config unsecured-communication-protocols command
- config user add
- config user class
- config user del
- config user password
- config web command
- config web-mode command
- config web-timeout command
- console cable
- conventions
- customer support 1, 2
D
E
- e-mail lists
- elements
- EMC testing
- enable mode password
- environmental specifications
- event states
F
- factory defaults
- ftp command
G
- graphical user interface
H
- halt command
- hardware
- height
- humidity
I
- input voltage
- installation instructions
- installation requirements
- IP address
K
L
- log page
- login class
- changing by Admin user
- login page
M
N
P
- parameters
- password
- physical dimensions
- ping command
- port LEDs
- power
- PTP
R
S
- safety testing
- save scp authlog command
- save scp daemonlog command
- save scp eventlog command
- save scp syslog command
- save tftp authlog command
- save tftp daemonlog command
- save tftp eventlog command
- save tftp syslog command
- scp command
- SNMPv3
- software
- specifications
- SSH
- status page
- support
- support, technical See technical support
- system LEDs
T
U
- unpacking the chassis
- upgrading See software
- user account
- admin password changing
- admin password reset
- creating Read-Only user
- creating Read/Write user
- deleting Read-Only user
- deleting Read/Write user
- guidelines
- management
- modifying
- overview
- Read-Only user password changing by Admin user
- Read/Write user password changing by Admin user
- Read/Write user password changing by Read/Write user
- user interface
W
Elements that You Can Configure in the CLI
To list the elements that you can configure using the CLI, type enable at the prompt and press Enter. Table 35 list the configurable elements that appear.
Table 35: Configurable Elements in the CLI
Command | Description | Supported Users |
|---|---|---|
backup tftp | Backs up the configuration file to a TFTP server. | Admin |
backup scp | Backs up the configuration file (config.dat) in the specified path of the SCP server. Note:
| Admin |
clear alarm | Clears the alarm. |
|
clear authlog | Clears authorization log. | Admin |
clear daemon log | Clears daemon log. | Admin |
clear eventlog | Clears event log. | Admin |
clear ptp-stat | Clears the PTP statistics. |
|
clear syslog | Clears system log. | Admin |
config 1/5/10MHz | Selects between 1 MHz, 5 MHz, and 10 MHz output on the 1/5/10 MHz port. |
|
config accounting | Enables or disables RADIUS accounting in the Timing Client. |
|
config accounting-level | Configures the information to be used by the Timing Client for accounting. The values are:
|
|
config accounting-server add | Adds the IP address of the RADIUS accounting server and sets other related configurations (secret word, retries, timeout, and port) to be used by the Timing Client for accounting. |
|
config accounting-server del | Deletes the RADIUS accounting server and its configuration from the accounting server list by using the IP address of the accounting server. |
|
config alarm-email-receiver | Configures recipients of alarm e-mail notifications. |
|
config alarm-profile | Configures the alarm profile. | Admin |
config antenna-cable-delay-compensation | Configures a delay compensation value in the range of -10000 through 10000 nanoseconds to compensate antenna cable delay. Note: You are advised to enter:
|
|
config antenna-voltage | Configures the input voltage for the antenna as 3.3V or 5V. |
|
config auth-order | Configures the authentication order to be followed by the Timing Client while authenticating an user. The following combination of authentication order is allowed:
|
|
config change-password | Modifies your current login password. | Read/Write |
config cli-banner-file | Downloads the specified text file from the mentioned path of the configured Secure Copy Protocol (SCP) server to the /etc/config/cli_banner.txt path for customizing the CLI banner. The downloaded file should be a plain text file. On rebooting, the TCA system checks for the cli_banner.txt file and displays the content in the file as CLI banner. Note:
| Admin |
config cli-banner-text | Configures a customized CLI banner. The CLI banner text that you have provided in this command is stored in the cli_banner.txt file in the /etc/config path. On rebooting, the TCA system checks for the cli_banner.txt file and displays the content in the file as CLI banner. The maximum length of the CLI banner text that you can enter in this command is 100 characters, which include spaces and special characters. You can also use special characters (such as \n. \v, \t, and so on) to format the CLI banner text provided in this command. Note:
| Admin |
config cli-timeout | Configures the session in-action session timeout. |
|
config datetime | Configures date and time for the Timing Client. |
|
config dns0 | Configures the primary DNS server IP. |
|
config dns1 | Configures the second DNS server IP. |
|
config domain | Configures the domain. {domain name} |
|
config dst | Configures offset, starting date and time, and ending date and time for DST. |
|
config e1 output loopback | Configures the E1 input port’s number of ports, mode, framing, encoding, Receive Sensitivity, SSM, and state. |
|
config e1 output port | Configures the E1 output port’s number of ports, mode, framing, encoding, LBO, SSM, and state. |
|
config enable-password | Modifies the password of the enable mode. | Admin |
config eth0 auto-nego | Turns Auto Negotiation ON or OFF for Ethernet 0 (LAN1) port. |
|
config eth0 duplex | Selects the duplex mode for the Ethernet 0 (LAN1) port between half or full duplex. |
|
config eth0 ip | Configures IP settings for Ethernet 0 (LAN1) port : IP address, mask, and gateway. |
|
config eth0 ip-mode | Selects the IP mode for the Ethernet 0 (LAN1) port between Static and DHCP. |
|
config eth0 speed | Selects the speed for the Ethernet 0 (LAN1) port between 10 and 100 Mbps. |
|
config gps anti-jamming | Enables or disables the anti-jamming capability for the Resolution SMT GPS Timing Receiver. Note: This command is available only if the TCA6500 Timing Client uses the Resolution SMT GPS Timing Receiver. |
|
config holdover-state | Configures the TCA system to remain in the holdover state or change to the internal state after 24 hours of holdover state.
|
|
config hostname | Configures the hostname. {hostname} | Admin |
config language | Configures the webpages language. |
|
config password | Modifies your current login password. | Admin |
config pps-squelch | Turns on or off the PPS squelch.
|
|
config ppx | Configures PPx. |
|
config primary-ptp-server | Configures the primary (PTP) proprietary packet based timing protocol. |
|
config ptp add server | Adds a PTP server. |
|
config ptp slave | Configures PTP slave. |
|
config ptp slv disable | Disables the PTP protocol. |
|
config ptp slv domain | Configures the PTP domain number to be part of the same Grandmasters domain. |
|
config ptp slv dscp | Configures the Differential Service (DiffServ) of the IP packet. |
|
config ptp slv enable | Enables the PTP protocol. |
|
config ptp slv profile | Configures the profile for unicast packet types for both sync and delay request / response PTP event messages. |
|
config ptp unicast acc-master add | Adds the IP address of the acceptable Grandmasters for the Timing Client, which is used for the Ethernet network packet IP protocol. |
|
config ptp unicast acc-master del | Deletes the IP address of the acceptable Grandmasters for the Timing Client, which is used for the Ethernet network packet IP protocol. |
|
config ptp unicast announce | Configures the announce message rate that the Timing Client requests from the Grandmaster. |
|
config ptp unicast delay | Configures the delay response message rate that the Timing Client requests from the Grandmaster. |
|
config ptp unicast duration | Configures the Timing Client expiration duration for sending signaling messages without receiving an acknowledgement from the Grandmaster. |
|
config ptp unicast signaling | Enables or disables the sending of the signaling messages to the Grandmaster.
|
|
config ptp unicast sync | Configures the sync message rate that the Timing Client requests from the Grandmaster. |
|
config radius-server add | Adds the IP address of the RADIUS authentication server and sets other related configurations (secret word, retries, timeout, and port) to be used by the Timing Client for user authentication. |
|
config radius-server del | Deletes the RADIUS authentication server and its configuration from the authentication server list by using the IP address of the authentication server. |
|
config secondary-ptp-server | Configures the secondary (PTP) proprietary packet based timing protocol. |
|
config snmp contact | Configures the SNMP contact. |
|
config snmp readonly-community | Configures the SNMP read only community. |
|
config snmp readwrite-community | Configures the SNMP read and write community. |
|
config snmp-trap add | Adds a trap receiver address to the list. |
|
config snmp-trap del | Deletes a trap receiver from the list. |
|
config snmp-v3user add | Adds a SNMPv3 user. |
|
config snmp-v3user del | Deletes a SNMPv3 user. |
|
config snr | Selects SNR units between AMU or dBHz. Note: This command is not available if the TCA6500 Timing Client uses the Resolution SMT GPS Timing Receiver. The AMU is not an industry standard unit of measurement. |
|
config ssl-key | Downloads the specified SSL key file from the mentioned path of the configured SCP server. For more information about the dynamic SSL certificate support, see Dynamic SSL Certificate Overview. Note:
| Admin |
config ssl-cert | Downloads the specified SSL certificate file from the mentioned path of the configured SCP server. For more information about the dynamic SSL certificate support, see Dynamic SSL Certificate Overview. Note:
| Admin |
config sync-src-priority | Configures the highest priority Sync Source that the Timing Client should use. Choices include: GPS, E1, PTP, or Internal. |
|
config timezone | Configures the time zone information. |
|
config unsecured-communication-protocols | Enables or disables unsecured transfer or communication protocols such as ICMP, TFTP, FTP, and Telnet protocol. The values are:
By default, all the unsecured transfer or communication protocols are enabled. |
|
config user add | Creates a new user account with login class as Read-Only or Read/Write. | Admin |
config user class | Modifies the login class for the Read-Only or Read/Write user account. | Admin |
config user del | Deletes the Read-Only or Read/Write user account. | Admin |
config user password | Creates a new password for the Read-Only or Read/Write user account. | Admin |
config web | Configures the web enable/disable. |
|
config web-mode | Configures the web mode. | Admin |
config web-timeout | Configures the web-timeout. [min] | Admin |
ftp | Installs the specified software image from the configured FTP server. | Admin |
halt | Halts the system. |
|
ping | Pings the remote host. |
|
reboot | Reboots the system. |
|
reset config | Restores the TCA6500 Timing Client to the manufacturer default configuration. | Admin |
reset password | Restores the default password value. | Admin |
restart timeprobe-agent | Starts or enables the time probe agent. |
|
restart ptp | Starts PTP operations | Admin |
restore tftp | Restores the configuration file from a TFTP server. | Admin |
restore scp | Restores the configuration file from the mentioned path of the SCP server. Note:
| Admin |
save tftp authlog | Saves the author log to a TFTP server. |
|
save tftp daemonlog | Saves the daemon log to a TFTP server. |
|
save tftp eventlog | Saves the event log to a TFTP server. |
|
save tftp syslog | Saves the system log to a TFTP server. |
|
save scp authlog | Saves the author log in the specified path of the SCP server. Note:
|
|
save scp daemonlog | Saves the daemon log in the specified path of the SCP server. Note:
|
|
save scp eventlog | Saves the event log in the specified path of the SCP server. Note:
|
|
save scp syslog | Saves the system log in the specified path of the SCP server. Note:
|
|
tftp | Installs a software upgrade image file by TFTP. | Admin |
tftp license | Upload TFTP license for value-added features. |
|
scp | Installs the specified software image from the mentioned path of the configured SCP server. Note:
| Admin |
