Visually Testing the TCA6000 or TCA6500 Timing Client

  1. Connect the Timing Client and computer to the local network segment and launch the web browser.

    Note: The title banner displays TCA6000 as a generic model number for all TCA6000/TCA6500 models. The unique model number for the system configuration is displayed in the Status page.

  2. Open the Timing Client webpage by using the new IP address (from above), enter login/password.
  3. Click the Status button and observe the System page. The following information should be present:
    • Model
    • Board S/N
    • System S/N
    • Software version
    • Hardware version
    • FPGA version
    • Temperature
    • MAC address—Lan 1
  4. Click the GPS page, and observe the following information:
    • Receiver status = Good
    • Antenna status = Good
    • Satellite status = Acquired