Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Associating an SRX Series Device With Spotlight Secure Connector

 

After the connector is added as a fabric to Junos Space, you can associate an SRX series device to that connector. You can associate multiple SRX devices to each connector.

Note

Spotlight Secure does not support Logical System (LSYS) devices.

Before associating an SRX Series device, you must first generate the device auth token in the Global Connector Settings page. An alert appears if no auth token is present. See Figure 1.

Figure 1: Associating an SRX Series Device Without a Device Auth Token
Associating an SRX Series Device
Without a Device Auth Token

If your SRX device is already managed by the Security Director, skip to 5. If you have not already associated an SRX Series device with a connector, follow these steps:

  1. On the Junos Space Security Director user interface, select Devices > Device Discovery > Device Targets and then click the Add Device icon (+). See Figure 2.
    Figure 2: Adding a New Device Target
    Adding a New Device Target
  2. Enter the IP address of the SRX Series device that you want to associate with the connectorand click Add. See Figure 3.
    Figure 3: Specifying the SRX Series IP Address
    Specifying the SRX Series IP Address
  3. Enter the SRX Series device login credentials and click Add. See Figure 4.
    Figure 4: Entering SRX Device Login Credentials
    Entering SRX Device Login Credentials
  4. On the Junos Space Security Director user interface, select Jobs > Job Management to view the progress of adding the SRX Series device. When done, a Discovery succeeded message appears. See Figure 5.
    Figure 5: Viewing the Discovery Status
    Viewing the Discovery Status
  5. On the Junos Space Security Director user interface, select Security Intelligence > Spotlight Connectors.
  6. Right-click the connector you want to associate with SRX Series devices and select Device Association. See Figure 6.Note

    If you do not see the SRX Series device, make sure the SRX Series device’s release number and schema match that supported by Spotlight Secure. See the Spotlight Secure Supported Platforms Guide.

    Figure 6: Selecting the Connector to Associate Devices
    Selecting the Connector
to Associate Devices
  7. Select the SRX Series devices to associate with this connector and click Save. See Figure 7.
    Figure 7: Selecting the SRX Series Devices to Associate
    Selecting the SRX Series
Devices to Associate
    Note

    Spotlight Secure requires a specific DMI schema. If you do not see your SRX Series device, make sure the correct DMI schema is installed. See Updating the Schema and the Spotlight Secure Supported Platforms Guide  .

    A configuration commit is done on the device after it is associated. On the SRX550 and SRX650 devices, memory allocation is updated and the device is rebooted.

To verify the device association, run the show configuration CLI command on the SRX Series device or the Device Configuration View in Network Management Platform and look for the following entry:

The URL and auth-token entries will be unique to your configuration.