Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Appendix: Enterprise Data Center Solution Complete Configuration

 

This appendix provides the complete configuration of the Enterprise Data Center topology provided in this guide.

The optional procedures in the step-by-step procedures as well as the steps to commit the configuration are not included in this appendix. Procedures that can be performed on either aggregation device and synchronized to the other aggregation device are always done on aggregation device 1.

To quickly configure a device using the CLI configuration in this appendix: copy the following commands, paste them in a text file, remove any line breaks, change any details necessary to match your network configuration, copy and paste the commands into the CLI at the [edit] hierarchy level, and then enter commit from configuration mode.

The appendix is annotated for readability. The annotated text is ignored by the CLI if entered into a device so it can safely be copied and pasted into a CLI session.

Note

Multiple routing instances are configured in this appendix over the same interfaces. Only one virtual routing instance can be configured on an interface. In your deployment, create one virtual routing instance that includes the combination of OSPF, EBGP, DHCP Relay, and PIM-SM that is appropriate for your networking requirements.

MX480 Router (mx480-core-router):

Aggregation Device 1 (ad1-qfx10002):

Warning

The password password is used in the commit synchronization configuration procedure for illustrative purposes only. Use a more secure password in your device configuration.

Aggregation Device 2 (ad2-qfx10002):

Warning

The password password is used in the commit synchronization configuration procedure for illustrative purposes only. Use a more secure password in your device configuration.